AfterMarket Amp Install Help.
07-06-12, 10:10 PM
#16
Pole Position
Thread Starter
Join Date: Jul 2012
Location: Kansas
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
1. You have to remove the rear seats to access the factory sub. It has a harness that you can just disconnect; there is no wire cutting involved.
2. The orange wire on the end of the second connector is the correct one. It's what I used, documented in post #181 of the aforementioned DIY amp install thread.
3. Good luck!
2. The orange wire on the end of the second connector is the correct one. It's what I used, documented in post #181 of the aforementioned DIY amp install thread.
3. Good luck!
Did you see the pic i posted in my 1st post? From what you are saying i think i have connected it to the right wire....
i have it circled in red in the pic posted in the 1st post...
and thank you
07-06-12, 10:21 PM
#18
Pole Position
Thread Starter
Join Date: Jul 2012
Location: Kansas
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
finally got that over with...
Now, to unhook the factory sub and connect the amp power wire to the battery and i'm done.!
woohoo!!!!!
***Thank You Everyone That Helped Me...
Thread
Thread Starter
Forum
Replies
Last Post
Pnuge88
SC430 - 2nd Gen (2001-2010)
8
01-12-11 11:44 AM
lexus37
IS - 2nd Gen (2006-2013)
2
09-12-10 08:26 PM
SC300_704
Lexus Audio, Video, Security & Electronics
10
12-02-06 12:56 PM
