Notices
IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

Passenger window not working from master switch

Thread Tools
 
Search this Thread
 
Old Jun 9, 2012 | 12:39 PM
  #1  
misterlv's Avatar
misterlv
Thread Starter
Driver School Candidate
 
Joined: Mar 2011
Posts: 35
Likes: 0
From: WI
Default Passenger window not working from master switch

I replaced my blown tweeter on the driver side so I went on ahead and switched out the passenger side also. As soon as I put everything back together i noticed the passenger side window will only work on the passenger side switch. I also noticed when pulling off and on the master switch sometimes the auto down and up for windows will work and then not work. Im all confused. Fuses checked good, I opened the master switch also its good. Any advice?
Reply
Old Jun 9, 2012 | 12:42 PM
  #2  
ISCjonny's Avatar
ISCjonny
Racer
iTrader: (7)
 
Joined: Jun 2007
Posts: 1,305
Likes: 3
From: California - Bay Area
Default

you need to reset the window regulator since you probably disconnected the passenger switch. Pull the switch to roll up your window and hold for 3 seconds and then push and open your window and hold for 3 seconds.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KiNGD206
LS - 1st and 2nd Gen (1990-2000)
4
Jan 10, 2014 07:13 PM
Mortal300
SC - 1st Gen (1992-2000)
15
Jan 1, 2013 09:57 PM
Luv Da Lex
SC - 1st Gen (1992-2000)
6
Oct 10, 2008 12:35 PM
windom619
ES - 1st to 6th Gen (1990-2018)
5
May 8, 2008 05:05 PM
LRP_LS400
LS - 1st and 2nd Gen (1990-2000)
3
Aug 29, 2007 04:06 PM




All times are GMT -7. The time now is 10:17 AM.