Brabus Wheels on an IS - Page 2 - ClubLexus - Lexus Forum Discussion

IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

Brabus Wheels on an IS

Thread Tools Search this Thread
Old 10-12-10, 09:23 AM   #16
Lead Lap
Join Date: Aug 2007
Location: falling back and fading...
Posts: 720
Thanks: 0
Thanked 0 Times in 0 Posts

Are these wheels hard to find? And if you're buying used, I would think fitment becomes second priority if you really must have these wheels. Then add on the headache of redrilling the wheels and having to deal with potential wobbles.

I've experienced a tiny bit of vibration when I installed my last set of wheels. The car just did not feel solid even if it was minor and occasional--at least to me. Hubcentric rings eliminated that for me but the wheels were 5x114.3 to begin with.

I think you may be compromising too much to get the wheel design you loved years ago. If they truly are a must-have-once-in-your-lifetime set, then I'd wait until you have a 5x112 car. Maybe even pick up a set and hang on to them if you see one in the meantime.
chrisyano is offline   Reply With Quote
Old 10-12-10, 09:49 AM   #17
Join Date: Aug 2010
Location: around the world
Posts: 93
Thanks: 0
Thanked 0 Times in 0 Posts

Brabus belongs on MBs only, sorry
i would point and laugh at an MB with Fsport wheels
it is your money though and your car do what you want ;p
Eurosport is offline   Reply With Quote
Old 10-12-10, 11:43 AM   #18
Lexus Champion
Thread Starter
ndk83's Avatar
Join Date: Jun 2007
Location: DXB / AD
Posts: 2,825
Thanks: 0
Thanked 0 Times in 0 Posts


from Hartmann Achtung:

5x112 Wheels will fit 5x114.3 applications...heres how!
Current mood: optimistic
Category: Automotive most of you may know. Hartmann Wheels and Achtuning specialize in Volkswagen and Audi applications. Also, as some of you may know the bolt pattens on a majority of Audi/VW and Mercedes Benz vehicles have a 5x112 bolt pattern. The 5x114.3 bolt pattern is commonly found on Japanese manufactured vehicles such as Honda/Acura, Nissan/Infiniti and Toyota/Lexus. These steps will show you how to fit the 5x112 wheels to youre 5x114.3 application!!!

1. Make sure that the wheels you are fitting to your car have a center bore that is larger than the hub size on your vehicle.

2. Double check the offset of the wheels and whether the calipers on the car will not hit the back of the wheel when bolted up.

3. Purchase hub rings that will go inside the wheel and fill the gap between the wheels hub diameter and hub on the car. These can be purchased places or machined for a custom fit depending on the sizes.

4. Lastly, purchase CENTERING LUG NUTS. These lug nuts have a floating cone seat on them that will allow for the proper pressure to be put on the wheel in the correct spot because the bolt patterns are offset just a bit.

5. Lock everything down, make sure you have tires on the wheels, air in them and take it out on the town!!!

This all came about because a few employees here have a Toyota truck and Lexus...both 5x114.3 and one is running 5x112 wheels and the other will be soon! Also, this will increase the options that are available to either car community and could provide that DIFFERENT look that everybody wants for their vehicle. Keep it in mind when you are looking for wheels next. You just might not be out of luck!!!! Take care.


Read more:
looks like its ok to run 5X112 wheels if you follow those steps
ndk83 is offline   Reply With Quote
Old 10-12-10, 02:38 PM   #19
Lexus Fanatic
iTrader: (1)
Join Date: Mar 2003
Location: Florida
Posts: 11,346
Thanked 1 Time in 1 Post

Originally Posted by ndk83 View Post

from Hartmann Achtung:

looks like its ok to run 5X112 wheels if you follow those steps
Even with this I wouldn't do it. The ride won't be as solid as wheels that fir correctly.
Plus, I don't like seeing wheels meant for a Benz on a Lexus....or any other car. I consider it rice. Mild rice but still rice.
Ice350 is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
CA FS: Brabus Monoblock III 20x9.5 Set +35 Chrome + Tires heyitzalex Wheels and Tires Classifieds 7 01-23-14 09:08 PM
Wheel Situation: Redrilling, wobble bolts, adapters, etc. for 5x112mm wheel. stillfly45 SC- 1st Gen (1992-2000) 14 01-21-11 11:28 AM
which is more safe... redrill or adapters? stock_sc The Tire Rack's Tires, Wheels & Brakes Forum 7 12-02-09 02:50 AM
I've never wanted a van until today (Brabus Viano Lounge) Allen K Car Chat 21 09-29-09 02:56 PM
Reputable shop for Redrilling wheels in SOCAL daSC4 CL of Southern California 2 07-24-08 06:22 PM

5x1143 , bold , bore , brabus , cl , es300 , fit , length , lexus , lug , nut , pattern , rim , size , wheels

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

All times are GMT -7. The time now is 03:20 PM.

Copyright © 2000-2017 Internet Brands, Inc. All Rights Reserved
  • Ask a Question
    Get answers from community experts
Question Title:
Your question will be posted in: