Will those wheels fit? START HERE.
I would say you would most likely your going to rub a little. You might want to get the fenders rolled a tad. Theres a guy running 18x8.5 +20 and 18x9.5 +20 and he rubs very little just on turning, but he took a heatgun to his lining and fixed it I believe. I don't know what tire setup he is running.....with that being said I think a 215 would be fine
BUT you might have to roll a little depending on how low you go.
Im looking to purchase the Lumarai Morro Set with the following configuration,
20x8.5 with 225/30/20
20x10 with 275/30/20
or
19x8 with 235/35/19
19x9.5 with 265/35/19
or
19x8 with 235/35/19
20x10 with 275/30/20
Im looking for the least possible rub without having to make an fender adjustments. what do you guys think? i really need some help. also with the 20s, is it a big problem driving around having to worry about the roads? im also dropped with the F-Sport Springs
20x8.5 with 225/30/20
20x10 with 275/30/20
or
19x8 with 235/35/19
19x9.5 with 265/35/19
or
19x8 with 235/35/19
20x10 with 275/30/20
Im looking for the least possible rub without having to make an fender adjustments. what do you guys think? i really need some help. also with the 20s, is it a big problem driving around having to worry about the roads? im also dropped with the F-Sport Springs
Last edited by djmukn; Dec 1, 2010 at 10:24 AM. Reason: Forgot Information
All of those setups would work just fine with no rub depending on the offset.....I'm running 20x9 +38 235/30 and 20x10.5 +42 275/30 and I dont rub at all. But I beg you.....DO NOT put 19s in front and 20s in rear....looks dumb IMO.
lol thanks for the info man, really helps alot, are you dropped? im running on the f-sport springs
Hi guys,
I'm looking at these TE37 with this setup. Do I need to cut/shave/roll the lining or arches ?
18x9.5 for the front (+40 offset)
18x10.5 for the rear (+45 offset)
And what tyre would best to avoid doing any mods to the lining or arches?
Thank you in advance and much appreciated.
Jason
I'm looking at these TE37 with this setup. Do I need to cut/shave/roll the lining or arches ?
18x9.5 for the front (+40 offset)
18x10.5 for the rear (+45 offset)
And what tyre would best to avoid doing any mods to the lining or arches?
Thank you in advance and much appreciated.
Jason


