I had my first service a few weeks back and they adjusted my headlights and they are now uneven.

Does anyone have a DIY on how to adjust the height of the headlights? Photos would be great.

 

take off your engine covers, and then by the windshield washer tube on one side and near the intake box on the other are these silver looking cog-wheel things. You just put a philips screwdriver in there and turn to adjust.
Keep in mind that the driver side should be a little lower the passenger side.

 

I tried that, but it was really tight and when it moved slightly nothing happened.

 

Your low beams are supposed to be uneven (slightly) the drivers side is lower than the passenger's side.

 

It takes quite a number of turns on the cog wheel to make an effect. You'll be there for around 10 mins.

 

it's pretty tough
get a good grip and try again, you'll notice it if it is significant enough, just turn on your lights and look at the cut off point at a wall or something then adjust and go till you are happy =)

 

Check out this thread:
https://www.clublexus.com/forums/is-...t-success.html

 

clockwise up, counterclockwise down for both driver and passenger side?