Maybe we can get Javier to do this one?!?! 
DIY: camera mount for is350
Thread Starter
Lexus Champion
iTrader: (3)
Joined: Oct 2006
Posts: 1,903
Likes: 4
From: Dallas, Texas
DIY: camera mount for is350
OK so I am doing another track day this saturday and wanted to record it. I got my idea from this website, but realized their method would be dangerous if the car rolled, and that the tech/inspection probably would not ok that.
seen here:
http://blog.makezine.com/archive/200...camcorder.html
So I figured the safest way to do it, is to mount to the back seat head rest. This way I could have support from both sides. and nothing sticking out ready to stab me in the brain.
1. go to hardware store and purchase some of that square aluminum pole like material.
2. Cut it the length of your rear head rest, leaving a little room on each side
3. drill a 1/4 in hole in the middle (or whever you want to mount the camera). run a 1/4x20 bolt thru that puppy. You want this bolt to be tight and basically almost thread itself through. I also put a lock washer on this.
4. drill out holes for your u-bolts that attach to your head rest post
5. put in on, and tighten down all bolts.
6. mount your camera.
Total parts = $14.66
Total Time = 30 min (less if i had the proper size bit)
seen here:
http://blog.makezine.com/archive/200...camcorder.html
So I figured the safest way to do it, is to mount to the back seat head rest. This way I could have support from both sides. and nothing sticking out ready to stab me in the brain.
1. go to hardware store and purchase some of that square aluminum pole like material.
2. Cut it the length of your rear head rest, leaving a little room on each side
3. drill a 1/4 in hole in the middle (or whever you want to mount the camera). run a 1/4x20 bolt thru that puppy. You want this bolt to be tight and basically almost thread itself through. I also put a lock washer on this.
4. drill out holes for your u-bolts that attach to your head rest post
5. put in on, and tighten down all bolts.
6. mount your camera.
Total parts = $14.66
Total Time = 30 min (less if i had the proper size bit)
wow that's pretty ingenious! i wonder if you can buy a passenger headrest and rip off the headrest part to use the 2 poles and fabricate some sorta bracket to hold a camcorder on top of those 2 poles. then stick the camcorder into where the headrest should go. you'll have a passenger pov tho...
Trending Topics
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
Top 10 Lexus/Toyotas With The LEAST 5-Year Depreciation
Joe Kucinski
Lexus LC500 Convertible Auction: A Preview of Rising Values?
Brett Foote
GX 550 vs TX 550: Best 3-Row Luxury Lexus Family Hauler
Michael S. Palmer
9 Best Lexus Models You Can Buy for Half Price (And 1 You Shouldn't!)
Joe Kucinski
2026 Lexus NX Buyer's Guide: Models, Features, Prices & More!
Brett Foote
Top 10 Reasons to Buy a Lexus TX 550h+ (& 3 Reasons to AVOID!)
Michael S. Palmer
Top 10 Lexus & Toyota Models of the 1990s RANKED!
Joe Kucinski
10 Great Toyotas That Could Have Been Lexus Models
Joe Kucinski
Thread Starter
Lexus Champion
iTrader: (3)
Joined: Oct 2006
Posts: 1,903
Likes: 4
From: Dallas, Texas
Thread Starter
Lexus Champion
iTrader: (3)
Joined: Oct 2006
Posts: 1,903
Likes: 4
From: Dallas, Texas
