12-15-14, 04:03 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Exterior Guides
- Why Won't My Power Windows Go Up After Disconnecting Battery?
Guide to diagnose trouble and recommended solutions
Browse all: Exterior Guides
Electrical HELP!!! (Windows won't roll up after battery disconnect)
05-28-08, 02:14 PM
#16
Welcome to Club Lexus. Please take a look at the 2IS FAQ thread stickied at the top of this forum - this has many of the answers that are repeatedly asked (and answered).
Javier
Javier
02-28-10, 09:54 AM
#17
Driver School Candidate
Join Date: Nov 2009
Location: ontario
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
When the battery is disconnected, the power windows must be initialized in order to ensure proper operation.
here is what to do in simple terms:
1. open driver side front window halfway
2. close driver side front window and hold switch for 1 second
3. have a look at the other door window switches (they should be flashing)
4. repeat same procedure with other 3 window switches
Easy enough
here is what to do in simple terms:
1. open driver side front window halfway
2. close driver side front window and hold switch for 1 second
3. have a look at the other door window switches (they should be flashing)
4. repeat same procedure with other 3 window switches
Easy enough
05-13-10, 09:38 PM
#18
Lead Lap
iTrader: (10)
Join Date: Apr 2010
Location: TX
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
What about rear view mirrors----ever since I disconnected the battery to install the Ipod adapter now my side mirrors will not loook down in reverse. I did manage to get the windows and sunroof to work just fine, but not these.
any ideas?
any ideas?
07-02-10, 09:14 AM
#20
Driver
Join Date: Dec 2009
Location: FL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Pwr windows not working
Hey guys, I know that there is a process for resetting the window but I thought that it is only when the windows dont work at all. I have only the driver door working up and down with none of the other windows working from the driver switch or the window switches on the doors. I just wondered as the car was disassembled without the battery if any one has had this problem before?
07-02-10, 09:42 AM
#22
Next time try taking a look at the stickied FAQ/DIY thread. It contains this link answering that question, which might well be the most frequently asked question in this forum.
Javier
Javier
07-02-10, 10:01 AM
#26
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,446
Received 1,058 Likes
on
586 Posts
Hey guys, I know that there is a process for resetting the window but I thought that it is only when the windows dont work at all. I have only the driver door working up and down with none of the other windows working from the driver switch or the window switches on the doors. I just wondered as the car was disassembled without the battery if any one has had this problem before?
Follow the very helpful steps in this thread for resetting each switch.
If that doesn't work, make sure your child window lock button on the master switch is NOT pushed down..
***As that will prevent you from resetting the switches.
Joe Z
Last edited by Joe Z; 07-02-10 at 10:06 AM.
10-04-10, 03:13 PM
#29
10-04-10, 04:09 PM
#30
When you disconnect your battery it loses track of
"where" the window is in its travel.
So you have to calibrate/reset that.
It's not needed on 09+ models as those have flash memory (seriously) in each window controller to remember the position even after loss of power.
"where" the window is in its travel.
So you have to calibrate/reset that.
It's not needed on 09+ models as those have flash memory (seriously) in each window controller to remember the position even after loss of power.