Anyone using a differ shift knob on their IS350/250?
Thread Starter
Lexus Test Driver
Joined: Mar 2006
Posts: 894
Likes: 0
From: IN
Anyone using a differ shift **** on their IS350/250?
Know of any alternate ones that will fit? Just seems to sit a tad too high for my liking. Wouldn't bother me as much if the shaft it screws to wasn't so tall. Ideas and/or pics would be great!
hopefully the 250 manual can withstand the torque increase on a supercharger, theres no manual on the 350 because toyota doesnt have a modern tranny to handle the power from it
Trending Topics
Lead Lap
Joined: Jul 2006
Posts: 650
Likes: 0
From: NJ
I think that's hardly the case, There are people with the is 300 making upawrds of 400 hp with no problems. I doubt lexus engineers would'nt be able to design such a trans, worst case scenario they could have used the old tranny. I just think our trans can handle more power with no problems! Hey my 10 yr old mitsu with 450 hp had no problems with a stock trans, so i doubt that a brand like lexus would run into such problems.
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Lexus NX 350h: A Fuel-Sipping Secret Hot Hatch???
Michael S. Palmer
5 Best & 5 Worst Lexus Daily Drivers
Joe Kucinski
Top 5 Hottest Lexus & Toyotas in 2026 (Hardest To Buy)
Brett Foote
2026 Lexus IS 350 F Sport Review: The Last of Its Kind Still Rocks
Michael S. Palmer
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
lol i'm changing my seat to bride zeta III
so even i have vantilated seat = nothing
the center ac vent is still work, all i need just a OEM braket, they didnt seal it up
plug and play, all other vent still work good
the reason i didnt remove the CD input and mount it there
cuz the angle there is bad, no one can see it, my audio shop will help me remove the CD diplay later and mount the DVD there when the next ICE upgrade comes up
so even i have vantilated seat = nothing
the center ac vent is still work, all i need just a OEM braket, they didnt seal it up
plug and play, all other vent still work good
the reason i didnt remove the CD input and mount it there
cuz the angle there is bad, no one can see it, my audio shop will help me remove the CD diplay later and mount the DVD there when the next ICE upgrade comes up
Last edited by 6MTIS250; Sep 18, 2006 at 07:35 PM.
Lexus Test Driver
Joined: Jul 2006
Posts: 960
Likes: 2
From: San Diego, CA
so back to topic, who else has a shift **** that isn't stock on their 2IS? i've been wanting to get one but i've been told that most won't fit because of the shaft and i'm not exactly sure how to modify it/make it fit. any tips? i was planning to get the momo automatic **** btw...
Lead Lap
Joined: Apr 2006
Posts: 609
Likes: 0
From: CA
i think onihc has a baseball shaped one in his is250 that he showed me at the aerotect meet
sorry just to clarify im talking about the 6 speed manual. they came base with no packages on them.. a few came in with luxury packages or wutever but they were very very rare. some special ordered them the way they wanted.
sorry just to clarify im talking about the 6 speed manual. they came base with no packages on them.. a few came in with luxury packages or wutever but they were very very rare. some special ordered them the way they wanted.