Notices
IS - 1st Gen (2001-2005) Discussion about the IS models up to the 2005 model

*BIG ASS PROBLEM RIGHT NOW!!!* and i need your help!

Thread Tools
 
Search this Thread
 
Old Nov 18, 2011 | 08:40 AM
  #1  
hit42's Avatar
hit42
Thread Starter
Rookie
 
Joined: Mar 2011
Posts: 85
Likes: 0
From: MN
Default *BIG *** PROBLEM RIGHT NOW!!!* and i need your help!

kay, i was driving home yesterday. on the road, everything was fine. got to the hwy and then, starting to shake a little.. i didnt like it. exiting off to the nearest exit, the car had a hard time stoping. i mean like, i was pressing on to the brake and it shake like its freaking out. finally got to a complete stop and the car shake continuesly. i know something isnt right.. so i went to nearest store with the biggest parking lot. i got there and just when i was gonna go to the lot, the TRAC OFF light flashed. i parked the car and the car stop shaking. but the TRAC OFF light continue flashing... i try to go on home, it started to shake up again. bad as hell too... i made it home safely but theres something wrong with my car...

my car is an 01 lexus is300 w/ 144000 miles on it...

what do you guys think of whats going on? any help will be helpful...
Reply
Old Nov 18, 2011 | 10:04 AM
  #2  
Lux03lxus's Avatar
Lux03lxus
Rookie
 
Joined: Jul 2011
Posts: 96
Likes: 0
From: IL
Default

could be a sensor or your brakes need to be bled..check this link out and see if it works for u:

https://www.clublexus.com/forums/is-...-flashing.html
Reply
Old Nov 18, 2011 | 11:28 AM
  #3  
dsouthmia0's Avatar
dsouthmia0
Pole Position
iTrader: (3)
 
Joined: Jul 2011
Posts: 359
Likes: 1
From: fl
Default

Motor shake, or wheel shake? check oil, ball joints, tie rods, tires...
Reply
Old Nov 18, 2011 | 12:05 PM
  #4  
hit42's Avatar
hit42
Thread Starter
Rookie
 
Joined: Mar 2011
Posts: 85
Likes: 0
From: MN
Default

SO I WENT GO BYE ME AND OBD2 ENGINE OR CODE READER... I GOT 13 CODE..

P0300
Multiple Cylinder Misfire DetectedP0301

P0301
Cylinder 1 Misfire Detected

P0302
Cylinder 2 Misfire Detected

P0303
Cylinder 3 Misfire Detected

P0304
Cylinder 4 Misfire Detected

P0305
Cylinder 5 Misfire Detected

P0306
Cylinder 6 Misfire Detected

P0120
TP Sensor/Switch 'A' Circuit Malfunction

P0430
Catalyst Efficiency Below Normal (Bank 2)

P0440
EVAP Control System Malfunction

P0441
EVAP System Incorrect Purge Flow Detected

P0446
EVAP Vent Control Solenoid Circuit Malfunction

P1349
Variable Valve Timing System (Bank 1)
Reply
Old Nov 18, 2011 | 04:30 PM
  #5  
baadhabit's Avatar
baadhabit
Lexus Champion
iTrader: (2)
 
Joined: Apr 2002
Posts: 1,725
Likes: 1
From: NY to FL
Default

Ok you have a bunch of codes. Take it to a mechanic.
Reply
Old Nov 18, 2011 | 04:36 PM
  #6  
Vroomin350's Avatar
Vroomin350
Lexus Champion
iTrader: (28)
 
Joined: Jan 2011
Posts: 4,265
Likes: 3
From: SoFla
Default

woahhh. lot a codes but dont worry one thing wrong could cause all these to come as a snow balll effect. take her to a mechanic, the only thing I see that should be a little concern is the VVTI bank 1.
Reply
Old Nov 18, 2011 | 08:36 PM
  #7  
dustinbray's Avatar
dustinbray
Driver
 
Joined: Mar 2010
Posts: 113
Likes: 0
From: Nebraska
Default

Originally Posted by baadhabit
ok you have a bunch of codes. Take it to a mechanic.
r. O. F. L.
Reply
Old Nov 18, 2011 | 08:44 PM
  #8  
llllllllll's Avatar
llllllllll
Lexus Champion
iTrader: (1)
 
Joined: Oct 2005
Posts: 1,925
Likes: 0
From: philly
Default

Originally Posted by baadhabit
Ok you have a bunch of codes. Take it to a mechanic.
/thread
Reply
Old Nov 19, 2011 | 05:38 AM
  #9  
dsouthmia0's Avatar
dsouthmia0
Pole Position
iTrader: (3)
 
Joined: Jul 2011
Posts: 359
Likes: 1
From: fl
Default

p1349 and po120 are where your problem is. Do not drive the car. I'm thinking you need to have your timing checked and most likely have a throttle body issue. You may be better off just getting a used one but see what a mechanic says. Or get on my.is and start a thread so Jason can give you more info
Reply
Old Nov 20, 2011 | 09:55 AM
  #10  
hypervish's Avatar
hypervish
Lexus Test Driver
15 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Aug 2009
Posts: 5,724
Likes: 114
From: NJ
Default

Reset the codes, and then wait for the CEL to come back again. Then, post the first code that comes up. Obviously all of the codes you have right now are not accurate, when one cel comes up it can lead to other readings to be false which ends up giving you multiple codes.
Reply
Old Nov 20, 2011 | 02:48 PM
  #11  
evan2k's Avatar
evan2k
Driver
 
Joined: Jul 2011
Posts: 175
Likes: 42
From: Ca
Default

Its gonna blow!!
Reply
Old Nov 20, 2011 | 04:27 PM
  #12  
hit42's Avatar
hit42
Thread Starter
Rookie
 
Joined: Mar 2011
Posts: 85
Likes: 0
From: MN
Default

Alright thanks guys.. I gonna have to take her in.. Shes in a no-good situation right now.
Reply
Old Nov 25, 2011 | 12:55 PM
  #13  
sic_boy01's Avatar
sic_boy01
Driver School Candidate
 
Joined: Apr 2008
Posts: 8
Likes: 0
From: arizona
Default

Don't forget too report back on what the problem is...I have an 01' and want to know just incase this happens to my girl. Good luck bud, hope its nothing major.
Reply
Old Nov 25, 2011 | 02:15 PM
  #14  
dsouthmia0's Avatar
dsouthmia0
Pole Position
iTrader: (3)
 
Joined: Jul 2011
Posts: 359
Likes: 1
From: fl
Default

Funny I just removed my throttle body for an upgrade. Let me know if you end up needing one
Reply
Old Nov 25, 2011 | 06:37 PM
  #15  
ais300c's Avatar
ais300c
Pole Position
 
Joined: Sep 2010
Posts: 398
Likes: 0
From: fl
Default

um fyi if you still need help i have an account to whats called identifix its a program my shop uses to diagnose issues like this I believe dsouthmia0 is right on the tb but it may or may not be your timing belt skipping lemme know if you havent gotten it fixed man i will look it up
Reply



All times are GMT -7. The time now is 04:37 AM.