How to reprogram Auto window + memory seat function
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2007
Location: NY
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
How to reprogram Auto window + memory seat function
My Auto window and memory seat function doesn't work and the light that's on the window roll down button blinks. How do I turn them back on? Is there a sequence in pushing buttons to turn them back on?
#2
same thing happened to my IS. all i did was to roll down the window a little bit and roll it up and hold, don't release and wait for a "tick" sound. That should do it.
Last edited by ote111; 01-05-08 at 06:38 AM.
#7
Lead Lap
vehicle must be in park to program memory seats. Once in park, hold the "mem" button down then press the "1", "2, or "3" (if you have) button to lock it in. You'll get a beep confirmation.
For the windows, make sure you repeat the proceedure on each using the local switch (one on door itself). If goes in this order (and the blinking light on the local switch flashes to lead you along):
driver door
passenger front
passenger rear
driver rear
sunroof
For the windows, make sure you repeat the proceedure on each using the local switch (one on door itself). If goes in this order (and the blinking light on the local switch flashes to lead you along):
driver door
passenger front
passenger rear
driver rear
sunroof
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post