Notices
GX - 1st Gen (2003-2009) Discussion topics related to the 2003 -2009 GX470 models

Acceleration studder

Thread Tools
 
Search this Thread
 
Old Mar 5, 2022 | 10:12 AM
  #1  
B5S4's Avatar
B5S4
Thread Starter
6th Gear
 
Joined: Mar 2022
Posts: 6
Likes: 0
From: Minnesota
Default Acceleration studder

Good Afternoon, I purchased a 2008 GX470 with around 150K on it a few months ago. I noticed that it seems to studder and hesitate around 2K-2.5K RPM when accelerating. It doesn't happen all the time but the majority of the time it does. I initially thought it was a mis fire so I changed the spark plugs and coils however it still persists. I'm thinking it might be the transmission hesitating but I'm not sure. Any help or guidance to trouble shoot would be appreciated! Thanks!
Reply
Old Mar 5, 2022 | 06:01 PM
  #2  
QuinGX's Avatar
QuinGX
6th Gear
 
Joined: Mar 2022
Posts: 6
Likes: 0
From: MN
Default

Also following this. I feel like this is a common occurrence for my 06 gx470 I just changed plugs today. The engine runs smoother and better but no change in the bog/stutter it has under load. hope we both figure this one out
Reply
Old Mar 7, 2022 | 03:57 AM
  #3  
NTH's Avatar
NTH
Instructor
10 Year Member
Photogenic
Photoriffic
Liked
 
Joined: Dec 2014
Posts: 880
Likes: 162
From: MD
Default

Have you tried plugging in an OBD2 code reader? I would clean the throttle body with carb cleaner to see if that improves things.
Reply
Old Mar 7, 2022 | 03:49 PM
  #4  
QuinGX's Avatar
QuinGX
6th Gear
 
Joined: Mar 2022
Posts: 6
Likes: 0
From: MN
Default Cel

Originally Posted by NTH
Have you tried plugging in an OBD2 code reader? I would clean the throttle body with carb cleaner to see if that improves things.
have not tried OBD2 plugged in unless it’s to clear a P0430(catalytic system efficiency below threshold bank 2) code that pops up every 1-2 months.
I’ll have to check out the throttle body and clean it. Could that CEL light code be a concern or correlated?
Reply
Old Mar 7, 2022 | 04:37 PM
  #5  
B5S4's Avatar
B5S4
Thread Starter
6th Gear
 
Joined: Mar 2022
Posts: 6
Likes: 0
From: Minnesota
Default

I plugged in an OBD2 port however I didn't see any codes. I'll try cleaning the TB with carb cleaner!
Reply
Old Mar 11, 2022 | 01:09 PM
  #6  
MDSteamer's Avatar
MDSteamer
Pit Crew
5 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2020
Posts: 168
Likes: 31
From: MARYLAND
Default

This might be smarter.

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sxwk12
GS - 3rd Gen (2006-2011)
1
Oct 10, 2017 08:30 PM
SC300Gurl
SC - 1st Gen (1992-2000)
16
Aug 29, 2017 11:09 AM
hcole05
RX - 1st Gen (1999-2003)
5
May 31, 2016 01:01 PM
esky59
LS - 4th Gen (2007-2017)
1
Dec 27, 2013 04:48 PM
thaeleelyr
RX - 1st Gen (1999-2003)
4
Dec 22, 2010 05:44 PM




All times are GMT -7. The time now is 06:46 AM.