Plasti-Dip for Emblems
Gunmetal Lexus Emblems $400.xx nah....not worth...For $5.xx PlastiDip from Home Depot will look like this after following IS forum thread below and reversible if prefered.What do you think guys? Just want a different look.
https://www.clublexus.com/forums/is-...-required.html
https://www.clublexus.com/forums/is-...-required.html
Last edited by vince22; Jan 24, 2011 at 03:19 PM.
Gunmetal Lexus Emblems $400.xx nah....not worth...For $5.xx PlastiDip from Home Depot will look like this after following IS forum thread below and reversible if prefered.What do you think guys? Just want a different look.
https://www.clublexus.com/forums/is-...quired-33.html
https://www.clublexus.com/forums/is-...quired-33.html
This looks absolutely awesome! Was it really that easy peeling around the emblems? I have Blizzard Pearl, so these pictures provide a perfect preview.
yap, very easy. Here's what i did.
Clean/degrease your emblem first…..very important for adhesion.
Do a light spray that leaves dots on the chrome you're spraying, Wait 10 minutes before 2nd coat,
This coat should cover the entire chrome piece. Wait 15 minutes before 3rd coat.
Before you spray, look at the "chrome emblem" or whatever from all angles, to see if you missed any part of the chrome. Then spray another and get it in there but do not overspray. Wait another 15 min for 4th coat (optional). I have used only 3 coats on mine. Grab some beer, wait for 1 hour. Use your finger nail to peel off, I've use tooth /dental pick for inside letters and numbers. Have plenty of patience, if encounter hard to peel places/corners, use exacto knife or some sort. Good luck…
Thread
Thread Starter
Forum
Replies
Last Post
Govan187
LS - 3rd Gen (2001-2006)
1
Oct 28, 2017 01:31 PM
Fation
GS - 3rd Gen (2006-2011)
33
Jun 19, 2012 10:12 PM
Bullskim
IS - 2nd Gen (2006-2013)
10
Apr 24, 2008 03:43 AM






