DIY puddle light led
DIY puddle light led
hope this helps i thought since no one had a diy other then just explaining it i would try to make one.. if you have any questions PM me..
Last edited by 0mghi2u; Jan 7, 2013 at 08:21 PM.
when putting it back together just make sure the puddle light housing is in the correct place and the turn signal housing piece put back in the correct spot.. then put the black cover piece back on and make sure it all fits in without gaps.. if there is a slight gap on top and outer side towards the led turn signal ur fine cuz when you screw it in the gap will close up.. the puddle light housing has this white tab and the black cover housing has a opening for the black tab just make sure the white tab fits inside the black cover housing before tightening it all up... then when all done push the bottom mirror back in place first then the tops..and your all done..
ENJOY. hope this helped...
ENJOY. hope this helped...
Trending Topics
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Lexus NX 350h: A Fuel-Sipping Secret Hot Hatch???
Michael S. Palmer
5 Best & 5 Worst Lexus Daily Drivers
Joe Kucinski
Top 5 Hottest Lexus & Toyotas in 2026 (Hardest To Buy)
Brett Foote
2026 Lexus IS 350 F Sport Review: The Last of Its Kind Still Rocks
Michael S. Palmer
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
reverse lights are realllll easy...
open the trunk.. if u look at the inner upper trunk lid you will see those little plastic push clips.. take a pair of pliers or flat head and pull them off.. you don't have to take all of them off just the ones around the taillights.. then you will see the reverse light bulb socket.. pull it out install new led and push the pins back in and your done..
***if you reallllly can't figure it out let me know.. i'll make a quick diy******
open the trunk.. if u look at the inner upper trunk lid you will see those little plastic push clips.. take a pair of pliers or flat head and pull them off.. you don't have to take all of them off just the ones around the taillights.. then you will see the reverse light bulb socket.. pull it out install new led and push the pins back in and your done..
***if you reallllly can't figure it out let me know.. i'll make a quick diy******
Last edited by 0mghi2u; Jan 7, 2013 at 08:27 PM.
