pic added.. tried to capture it the best i can with my phone

 

Thanks for sharing....hmmm, never noticed my puddle light. Hope to see more led lights from others.

 

Great DIY posting. I have always wanted to this mod, but was not sure how to remove the mirror.

 

added to the DIY sticky, nice work buddy

 

thank you thank you

 

[QUOTE=0mghi2u;7689769]reverse lights are realllll easy...

open the trunk.. if u look at the inner upper trunk lid you will see those little plastic push clips.. take a pair of pliers or flat head and pull them off.. you don't have to take all of them off just the ones around the taillights.. then you will see the reverse light bulb socket.. pull it out install new led and push the pins back in and your done..

THANK YOU

 

On LED lights generally, it is critical to choose the appropriate type (not just electrical specs) of LED to provide maximum illumination for the specific application. Incandescent bulbs generally radiate semi-spherically, whereas LEDs can be made to emit in semi-spherical, radial, axial, or even unidirectional configurations. Three examples:

1) Trunk light - in the GS, the bulb aims directly downward into the trunk. Therefore an LED that emits its light axially is the right selection. One that emits radially will not give the maximum illumination of the trunk area.

2) Puddle/license plate light - since these applications require radial illumination just on one side of the bulb, the worst choice is axial, followed by distributed radial (typically only 1/4 of light is seen), then split radial (1/2 light), and finally, the optimal configuration is one-sided radial emission where 100% of emitted LED light can be directed downwards to form the puddle or to illuminate the plate.

3) Dome/footwell - in these applications, where a diffuse illumination rather than a "hot spot" is desired, a distributed radial (semi-spherical) configuration LED with more rather than fewer and SMDs mounted in a many-sided arrangement would be optimal.

When choosing LEDs for various applications, modders should specify what TYPE of LED they selected and give an indication of how well it fits the application.

 

[quote=Mi1lion;7690314]did you get it?

 

Yea, but didn't do it yet as I had homework last night. I got the concept though.

 

The only issue is that the OEM puddle light DIM's in and out when it comes on/off. With LED, there is no dimming feature as it would come right on/off.

 

Anyone have recommendations for where to purchase?

Thanks for the write-up!

 

Thanks for the write up! Got it done today! i find it easier with the back cover out rather than the front black piece out. When putting it all back, place the puddle light cover on the black cover 1st then hold on to the signal light in place with 1 hand, with the other hand pop back the back cover then it's all done after screwing back all the 5 screw & pop back the mirror!

I tried the way bro posted but it's so difficult to pop back the black cover as the puddle light keeps running around & difficult to pop the front black cover into the tab on the puddle light housing!

Btw wat kind of LED bulbs give the best illumination for this mod? As the bulb is shine on it's side rather than straight on if u get wat i mean. I'm using an LED dat has 1 LED on top, with 4 LEDs on the side like 4 corners. The shine is quite ok as 2 LED on the side will shine down... Dunno if T10 las LED bulbs like in a panel type with LED lying on a straight panel. This way all LEDs will shine down

 

v-leds or ebay..

 

my led dims on and off

 

no problem man.. good idea i didn't think of doing it your way.. lol.. fml took me like 10 tries to get one side back on.. but for led bulbs it really depends on what preferences you have .. i think others use the led where its flat and only one side has 2 leds on it so u can just aim it downwards