MPC\Evo-All remote start
Driver School Candidate
Joined: Mar 2016
Posts: 8
Likes: 1
From: ca
I left my Can Lo and high off, no need to connect, no need the hood switch also. It is either the programming or hardness like you guys said.
I got my kit from here: https://shop.mypushcart.com/plug-n-p...5-lexus-gs350/
I got my kit from here: https://shop.mypushcart.com/plug-n-p...5-lexus-gs350/
Thread Starter
Racer
Joined: Mar 2015
Posts: 1,629
Likes: 299
From: TX
I ended up returning everything. It just doesn't recognize the lock signal but it recognizes when the car is on because the orange light is lit when the ignition is on. Maybe a hybrid vehicle is different. But after spending 2 weeks trying to figure it out, I threw the towel in. I got tired of tearing the dash apart multiple times. hahaha.
Maybe I will try to the kit from MPC but I don't see how different it would be since the MPC is a Fortin kit.
Maybe I will try to the kit from MPC but I don't see how different it would be since the MPC is a Fortin kit.
Intermediate
Joined: May 2015
Posts: 409
Likes: 128
From: Virginia
For those that install the MPC system, if you have the T-harness is there a need to splice any wires (T-TAP)? I just want to confirm this before I start installing it.
EDIT: ok just noticed you guys didn't connect them
EDIT: ok just noticed you guys didn't connect them
Last edited by byungkuk; Oct 16, 2020 at 01:37 PM.
For just the remote start function I didn’t need to tap into any wires. Plug and play. The steering wheel harness is the one more to the right closer to being behind the push to start button. That one confused me for a while. Also when you get the blue light blinking your supposed to push the push to start button twice to complete the programming.
Thread Starter
Racer
Joined: Mar 2015
Posts: 1,629
Likes: 299
From: TX
I installed originally using only the T harness. Using the Remote the car would start. Using the app the car would start but would not lock / unlock doors. Today I connected the CAN +/- connectors and now the doors lock/ unlock from the app.
5th Gear
Joined: Aug 2024
Posts: 5
Likes: 1
MPC on GS450H was told I had aftermarket fob so no work
so I was told the MPC didn’t detect lock from my key fob because both of my fobs are aftermarket. They seem oem. I’m going to return as buying the mpc fobs brings me close to just buying compustar from Best Buy with free install. Complete waist of time!!
5th Gear
Joined: Aug 2024
Posts: 5
Likes: 1
Same issue
I'm having some issues with the aftermarket remote start system. I have the EVO-All system. The same system that MPC uses. I programmed the module via software, and install it in my car, successfully. The blue light flashes rapidly after the programming stage.
When I do the 3x lock on the key fob, I don't see any blue activity light or any light. When I hop in the car and start the vehicle up, the amber light stays solid. I made sure that the CAN LO and CAN HI made a proper connection, otherwise, I don't think it would program. Anything else I should check?
When I do the 3x lock on the key fob, I don't see any blue activity light or any light. When I hop in the car and start the vehicle up, the amber light stays solid. I made sure that the CAN LO and CAN HI made a proper connection, otherwise, I don't think it would program. Anything else I should check?
I had the exact same issue you are having. I was told this was because I had an after market Lexus key fob.
Thread
Thread Starter
Forum
Replies
Last Post
xknowonex
Mobile Audio/Video Classifieds
12
Feb 7, 2006 10:42 PM