Received new sd navi card do i have to take it to the dealer or does any one know how to program this please thanks

 

What year is your car?
Is it a GS 350?

 

I believe all you have to do is flip up the small door above the hazard button, press in on the old SD card to release it, pull it out, insert new SD card until it locks into place, and close the small door.

 

Where's that door ? Does the 14 have these SD card.

 

I believe it started MY2015+. It would be where the Mark Levinson label is.

 

14 is through usb port in the armrest. Dealer only

 

i know how to put it in.. And where it goes.. My question is does it need programming by the dealer. Card is not being read by navi

 

2015 yes gs 350 f

 

The install notes says for the Power to be OFF, and as you pull out the SD Card check the orientation of the card and be sure to reinstall the new card the same way.
If it isn't working check to see if the card can be inserted a different way.
FYI- I checked mine and the Label is Up and the contacts are down and go in first.

Good Luck

 

what power.. the radio? Or the car thanks

 

Instructions say "ACC Power" so I take it means Main Power is off.

 

so once inserted sd card should auto be read by the vehicle meaning anybody can do this that doesnt have to be taken to dealership

 

That is what I understand from what I have read on the Lexus website for Navigation Update.