When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
interesting. since its separated for the rear suspension. it should be easier switching it out with lowering spring without having to ripping out the back seat. Right?
Truck is so much improved its not even funny. Its much larger and much better shaped as people have noted. Shame Lexus still won't let the seat drop down though
Truck is so much improved its not even funny. Its much larger and much better shaped as people have noted. Shame Lexus still won't let the seat drop down though
Chief Engineer Kanamori told me they didn't allow a folding rear seat mainly because of chassis rigidity and noise.
interesting. since its separated for the rear suspension. it should be easier switching it out with lowering spring without having to ripping out the back seat. Right?
it depends on car design. on the 2gs and 3gs, i don't think you need to remove back seat to install springs
Yup that is correct on 2nd and 3rd gen GS, all you need to do is pull back on the trunk liners to access the shock bolts.
Will be interesting to see how its done on 4th Gen although it probably is the same for the shock, the spring probably requires unbolting the lower control arm for access. Looks like coilovers are going to be a trick for this new design.
Yup that is correct on 2nd and 3rd gen GS, all you need to do is pull back on the trunk liners to access the shock bolts.
Will be interesting to see how its done on 4th Gen although it probably is the same for the shock, the spring probably requires unbolting the lower control arm for access. Looks like coilovers are going to be a trick for this new design.
probably not a very big deal, similar design strategy is used in a lot of other cars including the m3. in terms of coilover prices and install cost, they are just about the same (as in not particularly more expensive due to design)
I dont understand why the 4GS trunk is just like my 1IS trunk where (assuming you dont have power trunk lid) the trunk lid when released from inside the car or the fob will not spring open. It just unlatches and you have to use your hands to push it open. I love my Merc C class where the trunk pops open. its really handy when you have your hands full