Changing footwell bulbs?
#1
Rookie
Thread Starter
Changing footwell bulbs?
i changed my puddle light bulbs today but for some reason I am losing it figuring out how to change the footwell bulbs. Can’t figure out how to get them out. Would be very thankful for concise instructions on how to remove them and the ones under the seats for the backseat illumination too.
While i am asking, how about the dome lights too?
Thanks
While i am asking, how about the dome lights too?
Thanks
#2
I believe those are soldered in place, they're not removable and require some modification with maybe hot glue/silicon (I'd hot glue so for easier removal later) combined with some soldering for connections.
Rather than removing them, you can run an LED strip (3-piece light) and use some wire taps to run it in parallel with your OEM bulb.
Photos for reference:
Rather than removing them, you can run an LED strip (3-piece light) and use some wire taps to run it in parallel with your OEM bulb.
Photos for reference:
The following users liked this post:
2006GeeEss (03-12-18)
#3
I was thinking this yesterday but with the Philips Hue LED strips and the Anker Roav VIVA to control it.
#4
Rookie
Thread Starter
That’s my plan but I am not the handy guy with wiring. Looking around to get it done. Changed all the ones I could. Fogs, parking, trunk and puddle. If I’m not mistaking, trunk light bulbs can’t be replaced?
#5
The interior trunk light is replaceable.
Trending Topics
#8
It's a cover that pops off. 168/194 size bulb.
#11
Are you talking about the license plate lights? Those are not user replaceable.
The reverse lights are user replaceable. 921.
The reverse lights are user replaceable. 921.
The following users liked this post:
2006GeeEss (03-15-18)
#12
Rookie
Thread Starter
#13
#14
Rookie
Thread Starter
#15
Reverse is a 921 bulb, not solder.