Thinking about going with a 19" setup for a 07 GS350 RWD lowered on BC Coilovers.

Specs are: 19x9.5 front and rear, +22 offset front and +30 offset rear.

Yay or Nay?

 

thats no brainier. it will fit perfectly fine.

but i'd try to find 19x10.5 +30 for the rear ones.

 

Not to thread jack, but how much fender modding will I have to do to get 19x10.5 & 11.5 +13 to fit ?. I'll on air btw, and I'm most likely going to get a camber kit.....thanks !

 

Hey Guys,
I have somewhat the same set up but my wheels are 20" high offset
they rub a lot now on every dips, speed bumps, railroads
anything I can do people say to lower it with new camberkits
I'm just afraid if I lower it it will rub more I have
HRE's on
f - 245 / 35 / 20
r - 275 / 30 / 20

20x9 +22*
20x9.5 +24

 

It's because your tire sizes are very large. Go for a skinnier tire like 225/35/20 and 255/30/20 in the back and it should relieve your rubbing issues. Be aware this will be a stretch set-up. If you don't want it nearly as stretched you could go with 245/30/20 and 255/30/20

 

anything else I can do? I like the stagger look.