A/C at driver's side - wrong servo?
Thread Starter
9th Gear
Joined: Nov 2012
Posts: 9
Likes: 0
From: Slovakia
A/C at driver's side - wrong servo?
I bought used GS450h and I found out driver's vents only blow cold air - no matter what temperature I set on A/C. Passanger's side is ok, no problem there.
As I browsed this forum I found out it is most probably due to faulty servo mixing cold and hot air. May my problem be really caused by faulty servo?
If so, can somebody confirm part numbers for these servos?
I found schematics here and it looks like 87106L (part number 8710630480) is what I need. Correct?
Thanks!
As I browsed this forum I found out it is most probably due to faulty servo mixing cold and hot air. May my problem be really caused by faulty servo?
If so, can somebody confirm part numbers for these servos?
I found schematics here and it looks like 87106L (part number 8710630480) is what I need. Correct?
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
LJ94
ES - 1st to 6th Gen (1990-2018)
10
Aug 25, 2020 01:31 PM
bighogman
GS - 2nd Gen (1998-2005)
16
Aug 1, 2015 06:05 PM
LVLarry
GX - 1st Gen (2003-2009)
15
Feb 19, 2008 04:37 PM
