3GS wheel thread

Reply Subscribe

Thread Tools

Search this Thread

Jun 20, 2012 | 12:07 AM

#841

sexylexygs

Driver School Candidate

Joined: Jun 2012

Posts: 10

Likes: 0

From: ca

I just got myself a 2006 awd gs300 as a DD. what wheel look best. the stance sc5 or hre 597r both are 20 inch thx

Last edited by sexylexygs; Jun 20, 2012 at 12:22 AM.

Jun 20, 2012 | 10:54 PM

#842

ferrerski

Rookie

Joined: May 2012

Posts: 99

Likes: 0

From: CALIFORNIA

Quote:

Originally Posted by abcchoier

DFW TX

F-Sport Spring (RWD)
F-Sport Sway bar kit
Rims: VOSSEN VVS078
Finish Silver painted chrome lip
Rear 20x10.5 275/30
No fender mod
Front
20x9.0 245/35
No fender mod

Is your GS lowered in these pics?

Jun 21, 2012 | 04:49 AM

#843

Simmsled

Lead Lap

Joined: Jun 2012

Posts: 657

Likes: 4

From: Indiana

Any pics of the IS-F wheels on a 3GS?

Jun 25, 2012 | 03:16 AM

#844

artart

Driver School Candidate

Joined: May 2011

Posts: 2

Likes: 0

From: london

yes,I have. pics of gs-f

Attached Thumbnails

Jun 25, 2012 | 08:33 AM

#845

Gray3GS

Driver School Candidate

Joined: Jan 2010

Posts: 17

Likes: 1

From: CA

Will 9.5x19 and 10.5x19 +22 fit on lower/non-lower 3GS with no rubbing and/or fender roll?

Please offer tire specs that will keep the overall wheel diameter same as stock.

Thank you!

Last edited by Gray3GS; Jun 25, 2012 at 08:51 AM.

Jun 25, 2012 | 02:02 PM

#846

Lex6583

Driver School Candidate

iTrader: (1)

Joined: Jan 2012

Posts: 32

Likes: 0

From: CA

Is there any rubbing with this set up?

Jun 25, 2012 | 10:15 PM

#847

lkapimp216

Lexus Champion

iTrader: (2)

Joined: Sep 2009

Posts: 2,159

Likes: 3

From: md

Quote:

Originally Posted by Gray3GS

Will 9.5x19 and 10.5x19 +22 fit on lower/non-lower 3GS with no rubbing and/or fender roll?

Please offer tire specs that will keep the overall wheel diameter same as stock.

Thank you!

Those specs will definitely require fender work they are very similar to my specs on my 19s 225/35-19x9.5+17 &245/35-19x10.5+25 my rears clear my 1-1 1/2 mm and I have shaved them flat on the inside so my fender is like 1/8th of an inch thick where the wheel is closest to fender and I am slammed these specs will poke out alot at factory height. If you want to pull or grab camber arms those specs will work fine