Forced induction ?
Lexus Test Driver
Joined: Mar 2006
Posts: 821
Likes: 8
From: CA
Originally Posted by EG8
I searched but didnt come up with anything. Just curious are any of you third gens forced induction yet ?
Lexus Test Driver
Joined: Mar 2006
Posts: 821
Likes: 8
From: CA
Originally Posted by EG8
Who makes that setup ?
Procharger C-2 (takes 2 weeks for them to make)
HP 306 -> 386
TQ 277 -> 377
5 lbs boost.
The car still runs at stock ratings if anything in the belt snaps or S/C doesn't function
All piping is jet hot treated, made from 6061 T6 polished out
All couplers, o rings, intercooler, etc…included.
THIS IS A TUNER KIT….meaning…we set everything up at 5 lbs to run 80hp to the crank. What you choose to do after that is up to you. From what our engineer tells us, the car can run more boost. We set it at 5lbs to give it a nice plug and play feel. 8 hours labor for installation time. Blower sits at the bottom left side of the block so it’s closer to the ground…not very audible, which is a good thing.
The same kit is being developed for the IS250 and GS300.
Any questions, let me know!
Driver School Candidate
Joined: Feb 2006
Posts: 20
Likes: 0
From: ca
Eternity,
Good news.. PM me when you get it for the GS300, I am interested.
Good news.. PM me when you get it for the GS300, I am interested.
Originally Posted by Eternity3G
It's a private label brand, but it's pretty cool... Here's some specs...
Procharger C-2 (takes 2 weeks for them to make)
HP 306 -> 386
TQ 277 -> 377
5 lbs boost.
The car still runs at stock ratings if anything in the belt snaps or S/C doesn't function
All piping is jet hot treated, made from 6061 T6 polished out
All couplers, o rings, intercooler, etc…included.
THIS IS A TUNER KIT….meaning…we set everything up at 5 lbs to run 80hp to the crank. What you choose to do after that is up to you. From what our engineer tells us, the car can run more boost. We set it at 5lbs to give it a nice plug and play feel. 8 hours labor for installation time. Blower sits at the bottom left side of the block so it’s closer to the ground…not very audible, which is a good thing.
The same kit is being developed for the IS250 and GS300.
Any questions, let me know!
Procharger C-2 (takes 2 weeks for them to make)
HP 306 -> 386
TQ 277 -> 377
5 lbs boost.
The car still runs at stock ratings if anything in the belt snaps or S/C doesn't function
All piping is jet hot treated, made from 6061 T6 polished out
All couplers, o rings, intercooler, etc…included.
THIS IS A TUNER KIT….meaning…we set everything up at 5 lbs to run 80hp to the crank. What you choose to do after that is up to you. From what our engineer tells us, the car can run more boost. We set it at 5lbs to give it a nice plug and play feel. 8 hours labor for installation time. Blower sits at the bottom left side of the block so it’s closer to the ground…not very audible, which is a good thing.
The same kit is being developed for the IS250 and GS300.
Any questions, let me know!
Trending Topics
Joined: Feb 2001
Posts: 31,944
Likes: 2,737
From: North Carolina
Originally Posted by RidinGS
Eternity,
Good news.. PM me when you get it for the GS300, I am interested.
Good news.. PM me when you get it for the GS300, I am interested.
). You might want to check with Carson (PM SupraTRD or Carson-Lex) once this comes out. The first prototype IS350 with the blower I've seen was just posted by a member of ours (ro ro)
Lexus Test Driver
Joined: Mar 2006
Posts: 821
Likes: 8
From: CA
Originally Posted by DaveGS4
Carson Toyota (one of our forum sponsors) carries LMS products and does group buys on them from time to time (Eternity is not a forum sponsor and him PMing you to sell this will get him banned from the forum, so he doesn't want to do that ).
You might want to check with Carson (PM SupraTRD or Carson-Lex) once this comes out. The first prototype IS350 with the blower I've seen was just posted by a member of ours (ro ro)
). You might want to check with Carson (PM SupraTRD or Carson-Lex) once this comes out. The first prototype IS350 with the blower I've seen was just posted by a member of ours (ro ro)
Driver School Candidate
Joined: Feb 2006
Posts: 20
Likes: 0
From: ca
Originally Posted by DaveGS4
Carson Toyota (one of our forum sponsors) carries LMS products and does group buys on them from time to time (Eternity is not a forum sponsor and him PMing you to sell this will get him banned from the forum, so he doesn't want to do that ).
You might want to check with Carson (PM SupraTRD or Carson-Lex) once this comes out. The first prototype IS350 with the blower I've seen was just posted by a member of ours (ro ro)
). You might want to check with Carson (PM SupraTRD or Carson-Lex) once this comes out. The first prototype IS350 with the blower I've seen was just posted by a member of ours (ro ro)
I agree, Carson is great. They are currently working a bodykit for me..
Driver School Candidate
Joined: Feb 2006
Posts: 20
Likes: 0
From: ca
Originally Posted by DaveGS4
Carson Toyota (one of our forum sponsors) carries LMS products and does group buys on them from time to time (Eternity is not a forum sponsor and him PMing you to sell this will get him banned from the forum, so he doesn't want to do that ).
You might want to check with Carson (PM SupraTRD or Carson-Lex) once this comes out. The first prototype IS350 with the blower I've seen was just posted by a member of ours (ro ro)
). You might want to check with Carson (PM SupraTRD or Carson-Lex) once this comes out. The first prototype IS350 with the blower I've seen was just posted by a member of ours (ro ro)
I agree, Carson is great. They are currently working a bodykit for me..
Thread Starter
Lexus Champion
Joined: Aug 2001
Posts: 1,996
Likes: 6
From: Emerald City
Originally Posted by Eternity3G
Is this worth putting on a leased car? any opinions??? I was originally against it, but it seems more and more tempting....