When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I posted this on the Wheels Thread as well, but I didn't get an answer so I thought I'd try this way. Sorry if it is annoying.
Here's my current summer setup. Fronts are 19s 8.5j et45 on 225/40 tires with a 20mm spacer to clear the front calipers. Rears are 19s 9.5j et35 on 255/35 tires no spacer. Stretch is little to no. Car is lowered on yellow speed racing coilovers. No fender work has been done yet, as it only slightly rubs the fronts on big bumps. Been running this setup for the past 2 summers with no issues.
I have recently ordered a set of Work LS406 wheels. Fronts are 9j et32. Rears are 10j et32. I have been trying to figure out if I can run the same tire setup with little to no fender work. Fender work will be done if needed but I am looking at some advice so I can do it before the new wheels arrive, so I am prepared to just put them on and start rolling.
Any advice from the more experienced people is welcome! Will post pics once I get them on.
Fitment Question
