Best balljoints for my gs300
#1
Driver School Candidate
Thread Starter
Best balljoints for my gs300
Planning to change lower ball joints soon and was doing some shopping around , i know that moog is the go to but has anyone ever used mevotech ball joints ?
The following users liked this post:
SteezyGS (12-13-18)
#7
OEM is the best but Moog is at the top of the list coming in at a close 2nd place imo. Moog is nice because they have a grease fitting but if you take your Lexus to different places when you get your oil change or service done who knows what type of grease they use or even if they grease them at all.
Trending Topics
#9
If the moogs are not made in Japan, dont get them. I had some that were made in Indonesia lasted about 15k. They were very loose when I took them out.
Get OEM on ebay.
Get OEM on ebay.
Last edited by GSsportD; 04-05-19 at 02:03 PM.
#11
Driver School Candidate
Agreed with everyone who said to go OEM. I used to swear by Moog. The pair I installed earlier this year(made in Indonesia), developed a bad creaking/popping sound while turning within less than 1k miles. Swapped them out for new OEM ones and have been problem free since.
#12
Agreed with everyone who said to go OEM. I used to swear by Moog. The pair I installed earlier this year(made in Indonesia), developed a bad creaking/popping sound while turning within less than 1k miles. Swapped them out for new OEM ones and have been problem free since.
I am running Moog inner tie rods on my Lexus. They are "Made in Japan" but just be aware of the country of origin when you parts arrive because this problem is across the board with Moog parts for other vehicles as well.