Wheel fitment
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2009
Location: DFW,Texas
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Wheel fitment
I recently just bought some Varrstoen Es2 19x9.5 +22/19x10.5 +22 to put on my 99 Gs300 that has the Ls400 big brake upgrade. I know ill need to run spacers in the front to clear the caliper. They come with tires already on them 225/35 & 235/45.I just have lowering springs on at the moment(will do coil overs next).My question is will i need to roll/pull my fenders any if at all to run them on my current set up?
#3
Pole Position
iTrader: (1)
Join Date: Mar 2013
Location: CA
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
I had these wheels on my car, needed a 10mm spacer to clear the Supra TT calipers.
I ran 245/35 rear rather than 235, but not much difference.
You will need to roll the fronts and shave the rears to fit this with the natural camber you will get from lowering your car on coilovers, for which I would suggest BCs.
I ran 245/35 rear rather than 235, but not much difference.
You will need to roll the fronts and shave the rears to fit this with the natural camber you will get from lowering your car on coilovers, for which I would suggest BCs.
#6
#8
Driver School Candidate
Thread Starter
Join Date: Sep 2009
Location: DFW,Texas
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Would you call your set up meaty? It doesn't look to stretched which is exactly what i want.
Attachment 377151
Attachment 377154
Only pics I have on this device. I'm running 265/35 front and 305/30 rear on a 10.5"
Attachment 377154
Only pics I have on this device. I'm running 265/35 front and 305/30 rear on a 10.5"
#12
Driver School Candidate
Thread Starter
Join Date: Sep 2009
Location: DFW,Texas
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Got my wheels and put them on . I def need thicker tires in the rear since I'm not on coils right now, 245/35 isn't going to cut it. Any suggestions?
#13