Notices
GS - 2nd Gen (1998-2005) Discussion about the second generation GS300, GS400 and GS430 (1998 - 2005)

Stealth Sub Box for 2GS?

Thread Tools
 
Search this Thread
 
Old May 9, 2015 | 07:29 PM
  #1  
PandaGS300's Avatar
PandaGS300
Thread Starter
Driver
 
Joined: Mar 2015
Posts: 196
Likes: 1
From: ny
Default Stealth Sub Box for 2GS?

As the title states, I am looking for a Stealth box for a GS.

I haven't seen any vendors selling one for our cars.

Not sure but it look like I may have to go to a shop and get it done.

Any suggestions?
Reply
Old May 9, 2015 | 11:43 PM
  #2  
gsean400's Avatar
gsean400
Lexus Test Driver
 
Joined: Oct 2009
Posts: 882
Likes: 4
From: az
Default

Uhm. Most sub boxes will fit in the back pretty stealth.. Unless your going 15s with some huge ports.

Here is mine. Not done yet




Update!
Mine pictured went up, directly up into the 12 inch hole that i made. It was screwed directly into the deck with a rubber subwoofer ring to minimize and eliminate any rattles to the deck. I was ready to attach my carpeted wood wall to complete the stealth look, until i started to play around with the setup.

Long story short i came to the conclusion, that the bass is ALOT louder when the subwoofer is facing the trunk, and it even got louder the closer it was to the trunk. Crutchfield even did a DB test on this. I am now redoing everything. With the windows down the bass is almost completely gone. When air enters the cabin through the windows, it goes directly to the back window where the sub is trying to move air... This was my experience. Not worth it IMO

Last edited by gsean400; May 11, 2015 at 09:21 PM.
Reply
Old May 9, 2015 | 11:48 PM
  #3  
marshun's Avatar
marshun
Advanced
15 Year Member
 
Joined: Sep 2007
Posts: 701
Likes: 2
From: hi
Default

those boxes are custom. make them yourself. its easy
Reply
Old May 10, 2015 | 01:00 PM
  #4  
Mr Jokster's Avatar
Mr Jokster
Lexus Test Driver
iTrader: (8)
 
Joined: Aug 2008
Posts: 6,466
Likes: 91
From: California
Default

Evidently you guys dont know what a stealth enclosure is.

OP, what exactly are you looking for, lots of bass or just clean sound? The best enclosure for stealth that I recommend of good sound and pretty good bass (depending on quality of equipment) is just using your stock location and building a box that attaches to the bottom and is the length of the rear deck. Of course prep the deck properly. This will give you a stealth look and allow you to still keep your trunk. Depending how much cutting you want to do to the deck, you could also go as far as porting the box into the cabin as well. This set up is great for quite a few reasons, but one of my favorite reasons is because you'll get no trunk rattle since all the sound it going into the cabin.
Reply
Old May 11, 2015 | 07:56 AM
  #5  
maxx430's Avatar
maxx430
Lead Lap
 
Joined: Apr 2012
Posts: 590
Likes: 14
From: NorCal
Default

I was looking for something like this too. Maybe a box that attaches to one end in the trunk (quarter panel) and possibly opposite side of the amp/navi. Havent seen anything yet.
Reply
Old May 11, 2015 | 09:35 AM
  #6  
NorthStyle's Avatar
NorthStyle
Lexus Test Driver
iTrader: (16)
 
Joined: Dec 2012
Posts: 1,149
Likes: 0
From: FL, UK & Deutschland
Default

Originally Posted by maxx430
I was looking for something like this too. Maybe a box that attaches to one end in the trunk (quarter panel) and possibly opposite side of the amp/navi. Havent seen anything yet.
I don't think anyone's ever produced them commercially, but I've seen a handful of custom ones. There's a seller on ebay who makes custom enclosures to fit the raised/cubby portion of the GS trunk. Maybe you could contact him and ask him if he's able to make one for either of the sides?
Reply
Old May 11, 2015 | 08:55 PM
  #7  
BIGT400's Avatar
BIGT400
Driver School Candidate
 
Joined: Aug 2013
Posts: 18
Likes: 0
From: ca
Default



Here is mine
Reply
Old May 11, 2015 | 09:27 PM
  #8  
gsean400's Avatar
gsean400
Lexus Test Driver
 
Joined: Oct 2009
Posts: 882
Likes: 4
From: az
Default

Originally Posted by BIGT400


Here is mine
Nice setup, i am doing the same with mine as we speak!
Reply
Old May 12, 2015 | 12:45 AM
  #9  
clos430's Avatar
clos430
Lexus Test Driver
iTrader: (21)
 
Joined: Aug 2011
Posts: 1,420
Likes: 9
From: So.Cali
Default

This is what I think when I hear stealth set up
Attached Thumbnails Stealth Sub Box for 2GS?-dsc01083.jpg   Stealth Sub Box for 2GS?-sstp-1302-07-2b1998-lexus-gs-400-2bkinetik-battery.jpg  

Last edited by clos430; May 12, 2015 at 12:55 AM. Reason: Added pics
Reply
Old May 12, 2015 | 01:39 AM
  #10  
angus's Avatar
angus
Lexus Test Driver
iTrader: (4)
 
Joined: Jan 2007
Posts: 802
Likes: 10
From: WA
Default

I could have sworn there was a company making a proper stealth box type box - can't remember who though - I can't believe that nobody makes one...

I guess the 2GS production numbers are so small.
Reply
Old May 12, 2015 | 09:30 AM
  #11  
PandaGS300's Avatar
PandaGS300
Thread Starter
Driver
 
Joined: Mar 2015
Posts: 196
Likes: 1
From: ny
Default

Originally Posted by BIGT400


Here is mine
Is this the same as the guy who is selling them off ebay?
Reply
Old May 12, 2015 | 10:50 AM
  #12  
NorthStyle's Avatar
NorthStyle
Lexus Test Driver
iTrader: (16)
 
Joined: Dec 2012
Posts: 1,149
Likes: 0
From: FL, UK & Deutschland
Default

Not sure if that's the exact one but the ebay seller makes one just like it. I sent him a message yesterday about making one for the side of the trunk but have yet to hear back from him.
Reply
Old May 12, 2015 | 12:17 PM
  #13  
BIGT400's Avatar
BIGT400
Driver School Candidate
 
Joined: Aug 2013
Posts: 18
Likes: 0
From: ca
Default

Originally Posted by PandaGS300
Is this the same as the guy who is selling them off ebay?
Yup same guy off ebay
Reply
Old May 13, 2015 | 05:05 AM
  #14  
PandaGS300's Avatar
PandaGS300
Thread Starter
Driver
 
Joined: Mar 2015
Posts: 196
Likes: 1
From: ny
Default

Originally Posted by BIGT400
Yup same guy off ebay
Do you like it? was the quality what you expected?
Reply
Old May 13, 2015 | 07:29 AM
  #15  
LexusK's Avatar
LexusK
Racer
15 Year Member
Photogenic
Liked
Loved
iTrader: (14)
 
Joined: Jun 2008
Posts: 1,534
Likes: 24
From: Texas
Default

I would assume any local audio shop can do this. You just gotta give them the specs. They can measure the physical dimensions out themselves. I have been looking into doing this for my W6 as well. Got MDF boards in my garage that have been sitting in there for like 5 years now lol. Just gonna pay someone to do it for me.
Reply



All times are GMT -7. The time now is 03:32 AM.