Work Euroline DH
Thread Starter
Driver School Candidate
Joined: Jun 2012
Posts: 20
Likes: 0
From: U
Work Euroline DH
Hi
I have a GS300 MK2 & have recently purchased BC coilovers 8k-10k
I want to get some alloys, and quite like the Euroline DH by Work.
I have no previous experience on aftermarket alloys. Below are the specs. Will I need any spacers or arch rolling?
Rear – 18×10 Offset +23
Front – 18×9 Offset +29
Thanks
I have a GS300 MK2 & have recently purchased BC coilovers 8k-10k
I want to get some alloys, and quite like the Euroline DH by Work.
I have no previous experience on aftermarket alloys. Below are the specs. Will I need any spacers or arch rolling?
Rear – 18×10 Offset +23
Front – 18×9 Offset +29
Thanks
Rookie
Joined: Sep 2012
Posts: 78
Likes: 3
From: Ontario, Canada
shave the rears and roll the fronts. Minimal effort to fit those specs without spacers
https://www.clublexus.com/forums/gs-...thread-18.html
https://www.clublexus.com/forums/gs-...thread-18.html
Thread
Thread Starter
Forum
Replies
Last Post