As the title states... has anyone here used Eibach's upper control arms before? i find it hard as hell to find a review on them on our cars. i see a lot of reviews for the SPC uca's but not the Eibachs model number is 5.72270K Google it if you please. Ive been searching for the past 2 days. i want to buy it, hopefully as a better alternative to the SPC uca's . Reason being i want to adjust some positive camber up front as im riding kinda low and wearing out all side wall and shop cant get my camber alignment right upfront. i got 2k miles on fresh rubber and only side wall is getting buffed. if i can recall my front camber was like at -3 or so ...also the Eibachs also have a rear camber kit also need some feed back on that as well
if i cant find some help, Im thinking for the rear RCA or megan camber arms witch ever would help me get a Lil positive camber back in the rear (im at 3.5in rear) . my toe adjustments are kinda funky also due to my ride height also... side note car was hit from the front before but title still clean...and At Stock height, alignment was pretty close to oem spec.

sorry if there is anything confusing on my post. I am not a avid poster , i was so frustrated searching with no luck i had to try and post for some help /// any would be appreciated thanks in advance !

heres a link to the eibachs front uca
http://http://www.stillen.com/produc...70k-80844.html

and the rears Part #: 5.67510K

http://http://thmotorsports.com/eiba.../i-402893.aspx

update! links dont work and i dont know how to make it work
here some pics of my ride

 

Your links dont work yo

 

your right. try googling this 5.72270K im not really forum proficient mah bad.

 

Those fenders are Jacked up

 

haha yelp, wanna fix it for me?

 

http://www.carid.com/2005-lexus-gs-s...t-7610138.html



link to rear

 

Judging from the pic, they are SPC's.

 

yeah they do but i don't think its the same manufacture tho im trying to figure out which one i should get . performance peddler has it for 308 shipped and the lowest for the spc is like 360 i just cant find any feedback for the eibach's .

 

thanks brah

 

They're built the same way as SPC's. IMO you're going to get the same effect and quality. The joint is the problem on the SPC's.. The Eibachs are built the same way as you can see, so you're going to have the same joint problem.

 

Fyi Eibachs are rebranded SPC units.

 

thanks for the input

 

like your mamas face

 

humm really? didn't know that. are you sure?

 

What is the known problem with the SPC's ?