spacers for stock wheels
In terms of aesthetics and given the wheels are the same width, the one with the lower offsets will "look better." Usually wheels with lower offsets will have a deeper lip (which looks cooler to most and granted it has an outer lip). This is why you see VIP'd cars with such low offsets and wide widths, sometimes offsets are even in the negative.
Remember that is without fender mods. With fender mods, you can go even bigger (but I wouldn't recommend it). Just get wheels that fit your car correctly.
OP glad u made this....
i have been wondering about this lately and didn't wanna post something about it as im sure its been covered and way to lazy to search all the tire threads to find out the info about what size spacers i would need on my oem 16's with 205/55/16 (i think this is my tire size i forgot and its late and im not going outside) and info for me lo_dit or can i use the same spacers as above??
looks good
i have been wondering about this lately and didn't wanna post something about it as im sure its been covered and way to lazy to search all the tire threads to find out the info about what size spacers i would need on my oem 16's with 205/55/16 (i think this is my tire size i forgot and its late and im not going outside) and info for me lo_dit or can i use the same spacers as above??
looks good
and yes you could push it out to even 30mm up front and 38mm spacers in the rear if you felt the need to.
No. My stock wheels are 17x8 with a +50 offset. When you add spacers, you move the wheel further outside. So you have to subtract 38mm from the rear wheel and 33mm from the front wheel. The wheels will be equivalent to a 17x8 with a +17mm in the front and a 17x8 with a +12mm offset in the rear.
Remember that is without fender mods. With fender mods, you can go even bigger (but I wouldn't recommend it). Just get wheels that fit your car correctly.
Remember that is without fender mods. With fender mods, you can go even bigger (but I wouldn't recommend it). Just get wheels that fit your car correctly.
'lo dit'.. as in booty hole? hahaha
i also have OEM 16" wheels and OEM tire size was 225/55/16 for my gs430, could be different for gs300/400. but since you have 225/55/16, you can easily go with a 20mm spacer in front and a 25mm in rear. those were the spacers i used with the 16" oem setup.
and yes you could push it out to even 30mm up front and 38mm spacers in the rear if you felt the need to.
and yes you could push it out to even 30mm up front and 38mm spacers in the rear if you felt the need to.
ok so i finally went and looked at my old rim.
oem 16" rim is 16 x 7 1/2 (i forgot to right down the offset like a dummy but from reading on here it looks like its +55 offset)
so is 20/25mm gonna def do it?
i found this one although he is on 19's it doesnt seem like its 100% in the back but thats ok, it looks better than oem
https://www.clublexus.com/forums/sus...led-w-pix.html
oem 16" rim is 16 x 7 1/2 (i forgot to right down the offset like a dummy but from reading on here it looks like its +55 offset)
so is 20/25mm gonna def do it?
i found this one although he is on 19's it doesnt seem like its 100% in the back but thats ok, it looks better than oem
https://www.clublexus.com/forums/sus...led-w-pix.html
sakataj, to get them to sit almost flush like the pictures I provided, you will need a 49mm spacer for the rear and a 44mm spacer in the front. It still won't be flush because you are running thinner tires. Time for some wheels, man!
ok so i finally went and looked at my old rim.
oem 16" rim is 16 x 7 1/2 (i forgot to right down the offset like a dummy but from reading on here it looks like its +55 offset)
so is 20/25mm gonna def do it?
i found this one although he is on 19's it doesnt seem like its 100% in the back but thats ok, it looks better than oem
https://www.clublexus.com/forums/sus...led-w-pix.html
oem 16" rim is 16 x 7 1/2 (i forgot to right down the offset like a dummy but from reading on here it looks like its +55 offset)
so is 20/25mm gonna def do it?
i found this one although he is on 19's it doesnt seem like its 100% in the back but thats ok, it looks better than oem
https://www.clublexus.com/forums/sus...led-w-pix.html
Not!
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
8 Tips for Improving Your Hybrid or Plug-in Hybrid's Efficiency!
Michael S. Palmer
10 Best Lexus Models No One Remembers
Joe Kucinski
TRD Off-Road Premium: Best 2026 4Runner, Except This One Thing
Michael S. Palmer
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
Top 10 Lexus/Toyotas With The LEAST 5-Year Depreciation
Joe Kucinski
Lexus LC500 Convertible Auction: A Preview of Rising Values?
Brett Foote
GX 550 vs TX 550: Best 3-Row Luxury Lexus Family Hauler
Michael S. Palmer
9 Best Lexus Models You Can Buy for Half Price (And 1 You Shouldn't!)
Joe Kucinski
2026 Lexus NX Buyer's Guide: Models, Features, Prices & More!
Brett Foote
while we're in this subject.....do i need shave / roll my fender if i'm going to add this spacers :
20mm spacers in FRONT : 19x8 +37 235/35/19
30mm spacers in REAR : 19x9 +45 265/30/19
no finger gap.
20mm spacers in FRONT : 19x8 +37 235/35/19
30mm spacers in REAR : 19x9 +45 265/30/19
no finger gap.
nope lol
does anyone have any pics of the 16 inch oem wheels with a spacer? i have a set of 1" spacers i want to throw on there with the oems just to see what they look like but was wondering if anyone had actually done it, thanx yall.!!
Driver School Candidate
Joined: May 2006
Posts: 42
Likes: 0
From: IL
