DIY LED 3rd brake light.
I did the wiring.I'm in 213. its simple there's 3 wires on the 3rd brake light white is ground and the red positive the black is also positive you can use black or red wire. and for the bumper marker to parking / turn signals modification right now I running Dual Circuit Converters. it's $5 a pairhttp://canadiancruisercustomizing.co...products_id=13 * Allows a 2 wire LED to Function as a 3 wire LED
* Convert a 2 wire LED to function as a Running Light/Brake Light or Running Light/Turn Signal
* Works on all LED PVC strips, Pods, 5050 Strips & 1156 LED Replacement bulbs
* Excellent for additional side marker lighting or adding running/brake lights
* Easy to install
* No heat issues
I didn't like the way it flashes with the parking lights on.so I order some Drugz Circuits
The circuit is another way to have a single intensity work as a dual function light. This circuits allows your light to run at full power and when the turn signal is activated it turns the light off and then flashes back to full power. Giving a high contrast when using the turn signals. http://radiantz.com/cart/index1.html?c5.html&1
* Convert a 2 wire LED to function as a Running Light/Brake Light or Running Light/Turn Signal
* Works on all LED PVC strips, Pods, 5050 Strips & 1156 LED Replacement bulbs
* Excellent for additional side marker lighting or adding running/brake lights
* Easy to install
* No heat issues
I didn't like the way it flashes with the parking lights on.so I order some Drugz Circuits
The circuit is another way to have a single intensity work as a dual function light. This circuits allows your light to run at full power and when the turn signal is activated it turns the light off and then flashes back to full power. Giving a high contrast when using the turn signals. http://radiantz.com/cart/index1.html?c5.html&1
Last edited by 1SWTGS; May 30, 2010 at 11:15 PM.
*update* received the Drugz Circuits did not work on the gs
on these you have to ground the wire .and on the gs the parking lights and turning signal have separate grounds
the one I have on now has no grounding wire .I guess I have to stick with these
on these you have to ground the wire .and on the gs the parking lights and turning signal have separate groundsthe one I have on now has no grounding wire .I guess I have to stick with these
would have been nice if it worked. I might just connect it to turn signal only.
well i bought 4 of these LED strips, thought for some reason they were 24" long each and now i dont need them as they not long enough....anyone want them? 6 shipped for all 4.....pm me
OP did you just tap into the oem wiring for this http://www.youtube.com/watch?v=Fz5y8l7o8FM ?
OP did you just tap into the oem wiring for this http://www.youtube.com/watch?v=Fz5y8l7o8FM ?
well i bought 4 of these LED strips, thought for some reason they were 24" long each and now i dont need them as they not long enough....anyone want them? 6 shipped for all 4.....pm me
OP did you just tap into the oem wiring for this http://www.youtube.com/watch?v=Fz5y8l7o8FM ?
OP did you just tap into the oem wiring for this http://www.youtube.com/watch?v=Fz5y8l7o8FM ?
* Convert a 2 wire LED to function as a Running Light/Brake Light or Running Light/Turn Signal
* Works on all LED PVC strips, Pods, 5050 Strips & 1156 LED Replacement bulbs
* Excellent for additional side marker lighting or adding running/brake lights
* Easy to install
* No heat issues
http://canadiancruisercustomizing.co...products_id=13
Thread
Thread Starter
Forum
Replies
Last Post
