When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
so i hurt my motor last week and finally got the chance to pull it apart so i can inspect the damage, what we found is due to the failure to injector #4 which caused the piston to melt resulting in the total destruction of the motor.......small hole in to the cylinder wall also metal filing in the oil ......
the motor just pulled from the car waiting to be pulled apart for inspection
my machine just chilling on the lift..........
so with the help of my good friends at big daddy performance center here in south florida we're getting ready to do another build up this time im going with a different set upmore pics to come........randy
How are you going to make it a 3.2 stroker? Are you having a custom kit built for you?
yes its a custom built kit........consist of stroked/cut crank,rods and custom pistons with also a lot of prepping of the block to be able to accept the rotating assembly.....
so the new block with all new parts have been taken to the machine shop to get the work started,this process usually takes a while depends on their work load.........hopefully not too long
so finally here we go again.......the block and rotating assembly made it back from the machine shop and must say big thanks to them as they gave me first priority treatment........so now we just have to wait for the head but we can start the assembly process now,man im so excited about this project as my main goal would be to hit 1000hp on boost .....pics to come