When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Anyone know from experience or from looking at this diagram, which screws (and how many) and stuff I need to reinstall the under engine cover? My car came without one.
If you are looking to replace the large plastic shield you can go to RockAuto.Com and get one cheep. I paid $ 46. dollars plus shipping for one. Fits my 04 good.
Thanks for the info on this thread. Looking for one for my ISF.
I'm not sure if this thread will help you out other than referencing places to purchase a stock one... as I doubt the 2GS shield would fit an 2IS (although you "may" be able to get away with it by cutting/drilling/etc. Doesn't this IS-F come with this piece stock?
Yes it comes with one but mine is missing. I need the front part (51441D), and i already have the back part (51442E). However it is all sold as one piece and its expensive, more than the one for the GS.
EDIT: Another thanks to Mr Jokster! Your link just made me realize some additional info. You linked for a 2014 ISF which is cheaper than for my 2008. I dont know why the price difference, they should be the same. But the part number is one digit off:
A deer took the front of my driver side (2008 ES350) off but most of the screws are still in place. How do the existing screws "release" so I can remove and try to replace the entire panel?
