Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
- IS ES GS: How to Install Airbag Suspension
Step by step instructions for do-it-yourself repairs
Browse all: Steering and Suspension
air ride install is done!!!!
#136
Lexus Champion
Join Date: Dec 2005
Location: North Cali
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
I've been rocking my UAS setup for almost a week now. There is one thing that I'm not happy with, and thats the 'all the way down' in the front... I still got about a finger finger and a half gap. All bump stops are removed. I was thinking about hacking off the top hat (where the rubber bushing sits in) and that may give me about another inch drop. The only bad thing is that I'm afraid that this may interfere with the bag itself. Another option is roll center adapters. That is what I'd ideally want, but don't know where to order them from. Anybody got any insight to my dilemma?
fronts with all bump stop removed and top mount shaved, Rear with all bump stop removed:
(front top strut mount)
(fronts are resting on upper control arm)
so the car is able to go pretty low with UAS. should another inch lower with in the week. have some custom lower spring (bag) perch made(thinner is better ).. i will take picks when i get a chance.
#137
Pole Position
Join Date: Sep 2004
Location: Missouri
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Ben
#138
fronts with bump stop cut, Rears have bumpstop cut:
fronts with all bump stop removed and top mount shaved, Rear with all bump stop removed:
(front top strut mount)
(fronts are resting on upper control arm)
so the car is able to go pretty low with UAS. should another inch lower with in the week. have some custom lower spring (bag) perch made(thinner is better ).. i will take picks when i get a chance.
fronts with all bump stop removed and top mount shaved, Rear with all bump stop removed:
(front top strut mount)
(fronts are resting on upper control arm)
so the car is able to go pretty low with UAS. should another inch lower with in the week. have some custom lower spring (bag) perch made(thinner is better ).. i will take picks when i get a chance.
#145
Lexus Champion
Join Date: Dec 2005
Location: North Cali
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
i took it to a friends exhaust shop and had him cut it off with his tools. it was a huge cutting wheel. took him 2 seconds to line it up and 2 seconds to cut it. iono if dremel can do it.. maybe.