chrome trunk bar
Originally posted by 3dog
here is one description of install that i found:
POSTED BY GS4FUN
Registered: Oct 2001
Location: New Jersey
Posts: 4683
Get the OEM replacement part that replaces the existing bar. It is attached by 4 bolts . Two of them serve to hold the trunk key assembly. Its not a difficult replacement but be careful tightening the two inner bolts that hold the key assembly. Make sure the key barrel is centered in the trunk bar hole before you tighten the bolts or else you risk damaging or cracking the bar. Here's a picture of what it looks like up close.
You need to pull back the trunk cover lining to get access to the screws.
Let me know if you need more details. This was one of my first DIY projects.
Good luck
here is a link to the whole thread including the above
https://www.clublexus.com/forums/sho...0&pagenumber=1
i got the idea from that thread and it has quite a few pictures. i think i read somewhere that it is only about a 20- 30 minute install.
i'm getting one for my other car but it is on backorder
here is one description of install that i found:
POSTED BY GS4FUN
Registered: Oct 2001
Location: New Jersey
Posts: 4683
Get the OEM replacement part that replaces the existing bar. It is attached by 4 bolts . Two of them serve to hold the trunk key assembly. Its not a difficult replacement but be careful tightening the two inner bolts that hold the key assembly. Make sure the key barrel is centered in the trunk bar hole before you tighten the bolts or else you risk damaging or cracking the bar. Here's a picture of what it looks like up close.
You need to pull back the trunk cover lining to get access to the screws.
Let me know if you need more details. This was one of my first DIY projects.
Good luck
here is a link to the whole thread including the above
https://www.clublexus.com/forums/sho...0&pagenumber=1
i got the idea from that thread and it has quite a few pictures. i think i read somewhere that it is only about a 20- 30 minute install.

i'm getting one for my other car but it is on backorder
I agree with the guy that the above was taken from 110%!!
Thread Starter
Lexus Test Driver
iTrader: (1)
Joined: Apr 2003
Posts: 1,211
Likes: 4
From: Washington
Originally posted by GS4fun
3dog,
I agree with the guy that the above was taken from 110%!!
3dog,
I agree with the guy that the above was taken from 110%!!
i sure hope it was okay to do that.

i took a copy with me when i went to see my mechanic about installing it.

thanks for sharing the diy.
ivan
Thread Starter
Lexus Test Driver
iTrader: (1)
Joined: Apr 2003
Posts: 1,211
Likes: 4
From: Washington
Originally posted by GSTRANCE
congrats on getting the pic up.All you had to do was ask for some help a long time ago though
The bar looks good too.Straighten up the GS and the 400 though they look a little crooked@_@ or just take them off altogether
congrats on getting the pic up.All you had to do was ask for some help a long time ago though
The bar looks good too.Straighten up the GS and the 400 though they look a little crooked@_@ or just take them off altogetherdo you know how to fix it?
hey check this out i finally posted pictures
https://www.clublexus.com/forums/sho...252#post806252
i'm so happy i feel like spinning doughnuts and smoking some tires

i have been asking lots of people for help and it finally worked.
is there some way i could get you to design me a signature containing my mods and one of those little pictures below my name 3dog?
thank you ivan (3dog)
Thread
Thread Starter
Forum
Replies
Last Post
lunatyk
2Gen GS430 / 400/ 300 Classifieds (98-05)
13
Jun 3, 2010 04:20 PM








