2014 ES350 Front License Plate Mount(Bracket)
#16
Driver School Candidate
Join Date: Nov 2014
Location: NY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
You don't have to drill the front bumper in order to mount a front plate.
Here is my 2013 with a front plate using the factory supplied bracket. I have a spare bracket so I included a pic.
All I did was attach the plate to the bracket with screws and nuts. Then the bracket will just clip to the lower grille. It will not come off unless you push on the bracket and pull down to release the clips.
A car wash will not move it one bit.
It will not cause any damage to the paint.
John
Here is my 2013 with a front plate using the factory supplied bracket. I have a spare bracket so I included a pic.
All I did was attach the plate to the bracket with screws and nuts. Then the bracket will just clip to the lower grille. It will not come off unless you push on the bracket and pull down to release the clips.
A car wash will not move it one bit.
It will not cause any damage to the paint.
John
#17
Anyone know the part or model number for this bracket?
You don't have to drill the front bumper in order to mount a front plate.
Here is my 2013 with a front plate using the factory supplied bracket. I have a spare bracket so I included a pic.
All I did was attach the plate to the bracket with screws and nuts. Then the bracket will just clip to the lower grille. It will not come off unless you push on the bracket and pull down to release the clips.
A car wash will not move it one bit.
It will not cause any damage to the paint.
John
Anyone know the part or model number for this bracket?
Here is my 2013 with a front plate using the factory supplied bracket. I have a spare bracket so I included a pic.
All I did was attach the plate to the bracket with screws and nuts. Then the bracket will just clip to the lower grille. It will not come off unless you push on the bracket and pull down to release the clips.
A car wash will not move it one bit.
It will not cause any damage to the paint.
John
Anyone know the part or model number for this bracket?
#19
Thread
Thread Starter
Forum
Replies
Last Post