Notices
ES - 1st to 6th Gen (1990-2018) Forum for all 1990 - 2018 ES Models

Power Steering Rack

Thread Tools
 
Search this Thread
 
Old Oct 24, 2013 | 06:49 PM
  #1  
ViPeRs103's Avatar
ViPeRs103
Thread Starter
Driver
 
Joined: Jul 2010
Posts: 117
Likes: 0
From: FL
Default Power Steering Rack

I had a reman rack put in today due to excessive wear after 110k miles on the car. Before the rack was easy to steer left and right. Now it is a little more stiff from left to right. I put in Mobil 1 synthetic ATF fluid and bled the lines all the way left to right 3-5 times. Still on the original pump! Can that be the culprit or can it be something else. Any suggestions would be wonderful thanks again folks!!
Reply
Old Oct 24, 2013 | 07:19 PM
  #2  
LeX2K's Avatar
LeX2K
Lexus Fanatic
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Sep 2010
Posts: 26,053
Likes: 4,328
From: Alberta
Default

What brand of reman rack? Did the car get a wheel alignment?
Reply
Old Oct 24, 2013 | 07:25 PM
  #3  
ViPeRs103's Avatar
ViPeRs103
Thread Starter
Driver
 
Joined: Jul 2010
Posts: 117
Likes: 0
From: FL
Default

the original unit Koyo steering rack and Yes I got an alignment at lexus.
Reply
Old Oct 27, 2013 | 09:22 PM
  #4  
DGIKULJOT's Avatar
DGIKULJOT
Rookie
 
Joined: Aug 2012
Posts: 71
Likes: 0
From: CA
Default

I have replaced my steering rack myself with a re manufactured unit. For the first few weeks the steering was alot stiffer than usual. After a few weeks one handing smooth steering again

During this time I was also a little paranoid that the replacement rack might be bad but give it some time.
Reply
Old Oct 28, 2013 | 08:04 AM
  #5  
gabzor's Avatar
gabzor
Pole Position
 
Joined: Aug 2012
Posts: 268
Likes: 1
From: CA
Default

did you have to remove the engine or jack it up at least to get to the rack? just curious cause i need to do all my PS lines real soon..
Reply
Old Oct 28, 2013 | 02:09 PM
  #6  
DGIKULJOT's Avatar
DGIKULJOT
Rookie
 
Joined: Aug 2012
Posts: 71
Likes: 0
From: CA
Default

Originally Posted by gabzor
did you have to remove the engine or jack it up at least to get to the rack? just curious cause i need to do all my PS lines real soon..
No I did not have to do any of that. If you take of the air cleaner box most of the lines going nto the rack and accesible from the top
Reply
Old Oct 28, 2013 | 03:33 PM
  #7  
ViPeRs103's Avatar
ViPeRs103
Thread Starter
Driver
 
Joined: Jul 2010
Posts: 117
Likes: 0
From: FL
Default

DGIKULJOT thanks for the input.. & what I did is unbolted the sub frame and used a transmission stand with a block of wood on top of it to lower it down..allowing myself to have more access to the area & to better assist my reach to work easier
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DMPesso
GS - 2nd Gen (1998-2005)
7
Jun 18, 2014 01:19 AM
jsimms2
SC - 1st Gen (1992-2000)
4
Aug 31, 2013 10:13 AM
Luxor
Maintenance
1
Jan 21, 2007 10:36 AM




All times are GMT -7. The time now is 02:44 AM.