Notices
ES - 1st to 6th Gen (1990-2018) Forum for all 1990 - 2018 ES Models

"Replace bulb" dashboard light is on, but...

Thread Tools
 
Search this Thread
 
Old Aug 6, 2013 | 04:12 PM
  #1  
hmkim's Avatar
hmkim
Thread Starter
Rookie
 
Joined: Mar 2006
Posts: 51
Likes: 0
From: NY
Default "Replace bulb" dashboard light is on, but...

On my wifey's '06 330, the "replace bulb" dashboard warning light is on. Every bulb is working fine. What's going on?
Reply
Old Aug 6, 2013 | 07:53 PM
  #2  
repairmatt's Avatar
repairmatt
Pit Crew
10 Year Member
Photogenic
Liked
Loved
 
Joined: Jul 2013
Posts: 136
Likes: 44
From: Ohio
Default

Check all the turn signal and brake light lamps, does one seem dimmer than the other? If so, you may have corroded or loose contacts and that will cause the replace bulb warning light to falsely come on.
Reply
Old Aug 6, 2013 | 07:56 PM
  #3  
Jazzer's Avatar
Jazzer
Driver School Candidate
 
Joined: Dec 2012
Posts: 34
Likes: 0
From: PA
Default

Try rubbing some dialectric grease on all the bulb connections. If that doesn't work, just replace them all...
Reply
Old Aug 7, 2013 | 06:04 AM
  #4  
Megafast13's Avatar
Megafast13
Instructor
 
Joined: Aug 2008
Posts: 1,179
Likes: 6
From: Ohio
Default

Don't forget to check the 3rd brake light!


And don't forget the small taillight bulbs --not even sure if these trigger the warning though.

Last edited by Megafast13; Aug 7, 2013 at 06:31 AM.
Reply
Old Aug 7, 2013 | 06:29 AM
  #5  
PFB's Avatar
PFB
Lexus Champion
 
Joined: Oct 2009
Posts: 1,841
Likes: 48
From: Montreal, Canada
Default

You can also narrow it down a bit.

If the light comes on right after you press your brake pedal, than its a problem with one of the brake related bulbs, if not, than its one of the other bulbs.


Phil
Reply
Old Aug 7, 2013 | 06:49 AM
  #6  
msekanha's Avatar
msekanha
Intermediate
 
Joined: Dec 2011
Posts: 274
Likes: 6
From: RI
Default

License plate bulbs will set off an error also.
Reply
Old Aug 7, 2013 | 01:15 PM
  #7  
hmkim's Avatar
hmkim
Thread Starter
Rookie
 
Joined: Mar 2006
Posts: 51
Likes: 0
From: NY
Default

Originally Posted by Megafast13
Don't forget to check the 3rd brake light!
This is it! I need to figure out what bulb to use and how to replace the dead one. I'm sure Google will help.
Reply
Old Aug 7, 2013 | 01:54 PM
  #8  
Megafast13's Avatar
Megafast13
Instructor
 
Joined: Aug 2008
Posts: 1,179
Likes: 6
From: Ohio
Default

Originally Posted by hmkim
This is it! I need to figure out what bulb to use and how to replace the dead one. I'm sure Google will help.
Excellent. It's a 7440/7443 bulb.

To access it, go inside (backseat) and pop up and remove the 3rd brake light housing, disconnect the wiring harness and replace your bulb, reinstall!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
romayayo
RX - 2nd Gen (2004-2009)
2
Oct 3, 2017 03:58 PM
eloyc02gs3
GS - 2nd Gen (1998-2005)
6
Nov 2, 2012 09:40 PM
sleeper408
GS - 2nd Gen (1998-2005)
1
Jun 5, 2007 08:41 AM
hoonami
ES - 1st to 6th Gen (1990-2018)
5
May 3, 2007 03:25 PM
soyhead
GS - 2nd Gen (1998-2005)
8
Feb 8, 2006 04:39 AM




All times are GMT -7. The time now is 03:13 PM.