Notices
ES - 1st to 6th Gen (1990-2018) Forum for all 1990 - 2018 ES Models

'94 suspension

Thread Tools
 
Search this Thread
 
Old May 25, 2009 | 05:43 PM
  #1  
buci's Avatar
buci
Thread Starter
Driver
 
Joined: Aug 2008
Posts: 109
Likes: 1
From: ontario
Default '94 suspension

hey guys,anyone has any idea what the hell those 4 bars [2 each side]with bushings on each end on the rear suspension are called?they go from the center of the car to the bottom of the strut.I have one of them making some noise and it has quite a bit of slack.I lifted the car[i have a hoist] and it looks like i have to remove the gas tank to get that thing out and that's not happening any time soon...I could not find anything searching for it and it sound strange no one had this problem before.I have "only" 330.000 km on my '94,are they supposed to break so soon?They are only 15 years old damn it.
Reply
Old May 25, 2009 | 06:51 PM
  #2  
llcoolpass's Avatar
llcoolpass
Lexus Champion
 
Joined: Dec 2007
Posts: 1,673
Likes: 2
From: New Jersey
Default

Those things are control arms [in toyota/lexus, specifically, lower control arm 1 and lower control arm 2]
[If I remember correctly, sometimes they are called links, in certain context and instances -- not to be confused with stabilizer-to-control-arm / sway-bar-to-control-arm links-- but don't worry about this]

thing that wore out - bushings

sometimes you can a specific lube them up to reduce or eliminate nosie, other times you just have to replace the bushing.

yes it's normal
Reply
Old May 26, 2009 | 05:14 AM
  #3  
buci's Avatar
buci
Thread Starter
Driver
 
Joined: Aug 2008
Posts: 109
Likes: 1
From: ontario
Default

Ok,thank's,i am going to put some silicone lube on it and see what happens.Anyway,i can see that i can remove the rear ones but the front ones[on the gas tank side] look like the gas tank has to be removed first to take the friggin bolt out.Did you ever changed one of them?

Last edited by buci; May 26, 2009 at 10:19 AM.
Reply
Old May 27, 2009 | 12:30 PM
  #4  
llcoolpass's Avatar
llcoolpass
Lexus Champion
 
Joined: Dec 2007
Posts: 1,673
Likes: 2
From: New Jersey
Default

which bolt ... best if you screenshot the FSM and put an arrow ?
Reply
Old May 27, 2009 | 05:18 PM
  #5  
buci's Avatar
buci
Thread Starter
Driver
 
Joined: Aug 2008
Posts: 109
Likes: 1
From: ontario
Default

well.. i am not good at posting pictures here,last time i tried to post a picture of my engine...you did that for me.Anyway,those control arms are bolted to the car in 4 points,2 of them on the bottom of the strut each side (i don't know what's called in english) and the other end is bolted to the center of the car.Now the funny part..to take it out it's "easy" those things are seized solid but it gets better..2 long bolts which keeps them in place in the center of car are placed inside out,means those japs had the tank out before they put those damn things in,if you release the nut you cant take the bolt out because tank is in the way and it's a long bolt.And i guess it's not a selfsealin tank.Just take a look at yours without lifting the car you will get the idea.

Last edited by buci; May 28, 2009 at 05:44 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
waza8i78
RX - 2nd Gen (2004-2009)
30
Feb 8, 2021 02:55 PM
saustin
LS - 4th Gen (2007-2017)
35
Apr 23, 2015 09:25 PM
Jasoneo5
LS - 4th Gen (2007-2017)
11
Dec 17, 2012 12:33 PM
Drew903
GX - 1st Gen (2003-2009)
4
Sep 14, 2011 01:18 PM
aasc300
SC - 1st Gen (1992-2000)
7
Sep 9, 2003 05:56 AM




All times are GMT -7. The time now is 07:57 PM.