ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

AC blower speed problem

Thread Tools
 
Search this Thread
 
Old 09-20-14, 08:37 AM
  #1  
estodobluz
Driver School Candidate
Thread Starter
 
estodobluz's Avatar
 
Join Date: Feb 2014
Location: Cali
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default AC blower speed problem

Okay, folks, I've searched and not found, although I'm sure it's in here somewhere. Recently purchased a 97 ES300 that we love except the blower fan for the AC and heat/defrost only blows on low speed no matter what the controller is saying it's doing. The command is being sent but the message isn't being received.
I've scoured my service manual (which is a joke...so many typos...lousy interpreter) and have checked the controller as far as I can with the instructions in the manual, which says to replace with a known good one to check it...right...like I've got a few of those laying around. I've tested the power and grounds for the controller and the actual blower and it all checks out ok. I recently stumbled across some info about the "blower motor linear controller" which I think I'm down to by process of elimination (more or less) but I can't find one anywhere. I've searched the web, ebay, rockauto, etc but to no avail.
Does anyone have any suggestions about how to fix or locate one of these units. It's located by the throttle on the side of the console behind the lower dash cover from what I can tell. I haven't actually gone after mine yet....ran out of time.
Any help will be appreciated. Thanx. DanO
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TXMeatball
Performance & Maintenance
2
08-07-19 04:57 PM
DBartlett4
ES - 1st to 4th Gen (1990-2006)
1
06-12-18 05:00 PM
WoodBoss
ES - 1st to 4th Gen (1990-2006)
4
07-27-15 12:32 PM
ballz
GS - 2nd Gen (1998-2005)
8
06-17-09 01:01 PM
hwallen172
SC- 1st Gen (1992-2000)
0
09-15-01 09:44 AM



Quick Reply: AC blower speed problem



All times are GMT -7. The time now is 03:21 AM.