I had a noises like this (not so much a clicking, but more of a grab-grab-grab clunking) when my rotors had too much of a rust ring/ridge around the outermost and innermost areas (and only when the calipers kicked in below 10 km/h). My pads were down to 2mm, anyway, so I just did a complete front brake job and problem solved. I'm got a 2015 with 236,000 kms with no 'farting' noises of the brake actuator. Check your front brakes, first, it's cheap diagnosis. Generally speaking, CV axles are 'failed' when you get clunking/clicking very consistently in corners. Wheel bearings are gonna make loud groaning or 'wah-wah-wah' noises at speed.