Front Camber Adjustment
Rookie
Joined: Mar 2013
Posts: 71
Likes: 0
From: FL
Wheels look good on the car. How much camber did the bolts give you? usually cam bolts give you about - 2 degrees so if youre running 2 sets I would assume it should be - 4 degrees, but it doesnt look like it.
Thread Starter
Pole Position
Joined: Jan 2007
Posts: 205
Likes: 1
From: NY
It's no where near -4. I'm at the shop now, on a brand new hunter and its -1.3 and -1.4 deg front. Less than a degree each on the rear. With tanabe springs
But it's not a cam bolt. It's just an OEM bolt that's necked down in the center to allow the knuckle to move closer or further from the strut.
But it's not a cam bolt. It's just an OEM bolt that's necked down in the center to allow the knuckle to move closer or further from the strut.
Rookie
Joined: Mar 2013
Posts: 71
Likes: 0
From: FL
Yea true. Ill prob end up going with these...
http://www.rockauto.com/catalog/rafr...ttype=13512&ck[ID]=0&ck[idlist]=0&ck[viewcurrency]=USD&ck[PHP_SESSION_ID]=qqqk9s5d892b7ffo08tndf64s7
http://www.rockauto.com/catalog/rafr...ttype=13512&ck[ID]=0&ck[idlist]=0&ck[viewcurrency]=USD&ck[PHP_SESSION_ID]=qqqk9s5d892b7ffo08tndf64s7
Driver School Candidate
Joined: Mar 2013
Posts: 40
Likes: 0
From: CA
So I ended up getting SPC camber bolts. They are only $29 shipped for me. Got -2.6 and -2.3 front camber with BC coilovers installed.
Gonna need to get her some rear arms... too much camber.
wheel is slightly turned but you get the idea...
Gonna need to get her some rear arms... too much camber.
wheel is slightly turned but you get the idea...
tigermack, can u please post up a link to where u bought those? I wanna read up on the specs.
afaik most camber bolts only have 1.75 degrees of adj, i hear that spc can go up to neg -3, which you came very close to
those rear arms ........ more info please
Posted from ClubLexus.com App for Android
afaik most camber bolts only have 1.75 degrees of adj, i hear that spc can go up to neg -3, which you came very close to
those rear arms ........ more info please
Posted from ClubLexus.com App for Android
Driver School Candidate
Joined: Mar 2013
Posts: 40
Likes: 0
From: CA
tigermack, can u please post up a link to where u bought those? I wanna read up on the specs.
afaik most camber bolts only have 1.75 degrees of adj, i hear that spc can go up to neg -3, which you came very close to
those rear arms ........ more info please
Posted from ClubLexus.com App for Android
afaik most camber bolts only have 1.75 degrees of adj, i hear that spc can go up to neg -3, which you came very close to
those rear arms ........ more info please
Posted from ClubLexus.com App for Android
I am just thinking aloud for the arms, looks like that's what adjust the camber for the rear, like my old Mazda3.
Thread
Thread Starter
Forum
Replies
Last Post
KJG92
LS - 1st and 2nd Gen (1990-2000)
24
May 10, 2023 05:43 PM
ki_soarer
SC - 1st Gen (1992-2000)
6
Dec 16, 2006 10:56 AM
