Official "MODDED" CT200h picture thread!
Driver
Joined: Apr 2013
Posts: 176
Likes: 0
From: New Jersey
Driver School Candidate
Joined: Mar 2013
Posts: 40
Likes: 0
From: CA
Driver School Candidate
Joined: Apr 2014
Posts: 4
Likes: 0
From: Washington
Used grey metallic plastidip on the chrome, relocated the license plate - pre spacer install
spacers 25mm rear 20mm front
mirror relocation bracket
now the mirror isn't blocking half my view
did some other mods too, 5000k HID in headlights, LEDs in all the interior lights. Thinking that's it for awhile!
spacers 25mm rear 20mm front
mirror relocation bracket
now the mirror isn't blocking half my view
did some other mods too, 5000k HID in headlights, LEDs in all the interior lights. Thinking that's it for awhile!
Driver School Candidate
Joined: Apr 2014
Posts: 4
Likes: 0
From: Washington
Yeah I love it so far! The monitor is actually stationary, can't fold it or move it at all.
I really like the Redline color now, I originally wanted a grey color since that's the color I had last few cars but I think the red really makes it stand out and look aggressive like you said!
I really like the Redline color now, I originally wanted a grey color since that's the color I had last few cars but I think the red really makes it stand out and look aggressive like you said!
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
Top 10 Lexus/Toyotas With The LEAST 5-Year Depreciation
Joe Kucinski
Lexus LC500 Convertible Auction: A Preview of Rising Values?
Brett Foote
GX 550 vs TX 550: Best 3-Row Luxury Lexus Family Hauler
Michael S. Palmer
9 Best Lexus Models You Can Buy for Half Price (And 1 You Shouldn't!)
Joe Kucinski
2026 Lexus NX Buyer's Guide: Models, Features, Prices & More!
Brett Foote
Top 10 Reasons to Buy a Lexus TX 550h+ (& 3 Reasons to AVOID!)
Michael S. Palmer
Top 10 Lexus & Toyota Models of the 1990s RANKED!
Joe Kucinski
10 Great Toyotas That Could Have Been Lexus Models
Joe Kucinski
Driver School Candidate
Joined: Apr 2014
Posts: 4
Likes: 0
From: Washington
Thanks man! I almost dipped the bottom too but was too lazy to tape it off. I was able to remove the top part and paint it off the car. When it gets a little nicer out I think i'm going to finish up the job. Ideally I wanted to have it professionally painted to match the darker color under the fogs but this is a good cheap alternative to get rid of the chrome for now!
Driver School Candidate
Joined: Apr 2014
Posts: 5
Likes: 0
From: CA
Thanks man! I almost dipped the bottom too but was too lazy to tape it off. I was able to remove the top part and paint it off the car. When it gets a little nicer out I think i'm going to finish up the job. Ideally I wanted to have it professionally painted to match the darker color under the fogs but this is a good cheap alternative to get rid of the chrome for now!
Congrats on your CT!
Driver School Candidate
Joined: Apr 2014
Posts: 4
Likes: 0
From: Washington
I bought the True Metallics type at DipYourCar.com That way I can peel it off if I change my mind some day.
I actually removed the upper piece and painted it off the car, there are 2 screws that are a bit of a hassle to get off, and the rest is just clips you pry and pull. Be really patient when removing if you go that route. Painting it on the car should be fine too, just be sure you mask everything off to make the clean up easier, even though the dip is easy enough to remove.
White looks pretty sharp too! Thanks again man!
I actually removed the upper piece and painted it off the car, there are 2 screws that are a bit of a hassle to get off, and the rest is just clips you pry and pull. Be really patient when removing if you go that route. Painting it on the car should be fine too, just be sure you mask everything off to make the clean up easier, even though the dip is easy enough to remove.
White looks pretty sharp too! Thanks again man!
Lead Lap
Joined: Apr 2011
Posts: 702
Likes: 2
From: OK
hey guys i could really use ur help! my dealership might be letting me some light mods to a CT
that just came out of being a loaner car to give it a a fresh look to help it sell!
im realllly excited at this chance cus we never really modded anything to sell here before and would love to again
not that it matters but im more into the aggressive fitments but am going for a modest DD setup..SOOOOO
thinking off the top of my head... a drop with some RSR downs, a front lip, and some 18x8.5+35ish all around? too aggressive?
this thread isnt FULL of wheel specs so any suggestions/advice on best possible wheel sizes would be great! no fender work but fill the gap
that just came out of being a loaner car to give it a a fresh look to help it sell!
im realllly excited at this chance cus we never really modded anything to sell here before and would love to again
not that it matters but im more into the aggressive fitments but am going for a modest DD setup..SOOOOO
thinking off the top of my head... a drop with some RSR downs, a front lip, and some 18x8.5+35ish all around? too aggressive?
this thread isnt FULL of wheel specs so any suggestions/advice on best possible wheel sizes would be great! no fender work but fill the gap
Last edited by OKSTANCE; May 22, 2014 at 09:07 AM.