Replacement 2 and 3pc wheel components
#1
Former Sponsor
Thread Starter
Join Date: Aug 2009
Location: South FLA
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Replacement 2 and 3pc wheel components
I have been getting a lot of PM's from member on here about Replacement 2 and 3pc wheel components such as Lips (Chrome/ Polished and custom) Inner barrels and Assembly Bolts, If anyone needs any components we at MC3 keep most of this stuff in stock in many different sizes ranging from 18"-26" as well as the M7 and M8 chrome assembly bolts. Most of the parts are modular to MOST American 3pc brands and also work and many Japenese with the exception of some like Volk. We can either ship the parts straight to you and you do the work yourself or we can bring the wheels to us and disassemble them here. We also offer runout verification to ensure that the wheels are true and to minimize vibration on the road.
Last edited by MC3 Wheels; 05-26-10 at 02:04 PM.
#4
Former Sponsor
Thread Starter
Join Date: Aug 2009
Location: South FLA
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Former Sponsor
Thread Starter
Join Date: Aug 2009
Location: South FLA
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
#10
hi can i get a price quote for all new lips and barrels for 20s for my maya RT5.... 2pc and 3 pc.....the mayas are welded so 2pc is fine...offsets were 20x9 front et 30 would like to get down to 20 and rear is 20x10.5 et 29 25 will good...thanks...
#11
Former Sponsor
Thread Starter
Join Date: Aug 2009
Location: South FLA
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
#12
Just remember for a lot of Japanese wheels that are 3 piece are in fact welded under the silicone bead. I wanted to change lips on my VSKF's but work Japan said they were welded. I was like, wth. They said ONLY MEISTER S1 3 Piece can interchange parts. blehhhhhh.....
THIS IS SWEEEEET THOUGH. I'm gonna have to dig through my old pile of wheels and see if i can phatten them up a bit. I've got some old SSR/Hasemi wheels from Japan about 16 years go, high offset to boot. I needs me some phat outter lips.
What info did you need to verify fitment, fastener spacing, etc...? Can you do custom like the kodiak guys in Canada?
THIS IS SWEEEEET THOUGH. I'm gonna have to dig through my old pile of wheels and see if i can phatten them up a bit. I've got some old SSR/Hasemi wheels from Japan about 16 years go, high offset to boot. I needs me some phat outter lips.
What info did you need to verify fitment, fastener spacing, etc...? Can you do custom like the kodiak guys in Canada?
#13
Former Sponsor
Thread Starter
Join Date: Aug 2009
Location: South FLA
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Just remember for a lot of Japanese wheels that are 3 piece are in fact welded under the silicone bead. I wanted to change lips on my VSKF's but work Japan said they were welded. I was like, wth. They said ONLY MEISTER S1 3 Piece can interchange parts. blehhhhhh.....
THIS IS SWEEEEET THOUGH. I'm gonna have to dig through my old pile of wheels and see if i can phatten them up a bit. I've got some old SSR/Hasemi wheels from Japan about 16 years go, high offset to boot. I needs me some phat outter lips.
What info did you need to verify fitment, fastener spacing, etc...? Can you do custom like the kodiak guys in Canada?
THIS IS SWEEEEET THOUGH. I'm gonna have to dig through my old pile of wheels and see if i can phatten them up a bit. I've got some old SSR/Hasemi wheels from Japan about 16 years go, high offset to boot. I needs me some phat outter lips.
What info did you need to verify fitment, fastener spacing, etc...? Can you do custom like the kodiak guys in Canada?
#15
Former Sponsor
Thread Starter
Join Date: Aug 2009
Location: South FLA
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts