Pacific North West CL decal designs in progress
#61
Lexus Fanatic
Thread Starter
Join Date: Dec 2005
Location: Los Angeles/Vancouver
Posts: 6,231
Likes: 0
Received 0 Likes
on
0 Posts
i think we should go with black and white first
since these are the most common colours for vinyls that people will want
i will create a new order thread with info on sizing
but im not sure of pricing scheme yet and if we do order, we may have to order in a larger quantity to save some money
ill also have to go ask around to see which printer does the best job with least cost
since these are the most common colours for vinyls that people will want
i will create a new order thread with info on sizing
but im not sure of pricing scheme yet and if we do order, we may have to order in a larger quantity to save some money
ill also have to go ask around to see which printer does the best job with least cost
#64
Lexus Fanatic
Thread Starter
Join Date: Dec 2005
Location: Los Angeles/Vancouver
Posts: 6,231
Likes: 0
Received 0 Likes
on
0 Posts
i dont think we can do 10cm without resorting to using another design
because there are some parts of the vinyl that will just be too small and thin to withstand even touching
i think safest is 17cm wide (almost 7")
and about 2cm tall (almost 1")
so that is the approximate dimensions for small
for medium
probably around 10" wide (25.5cm)
about 1 1/4" tall (3cm)
could someone with 1IS, 2IS, 1SC, 1GS, 2GS, 3GS, 1LS, 2LS, 3LS and all the other models that want vinyls find out if the small can fit into the rear quarter panel window
also we will probably have to do external vinyls because most of us have tint on the rear so it will be hard to see the decals if they are placed on the inside of the window
because there are some parts of the vinyl that will just be too small and thin to withstand even touching
i think safest is 17cm wide (almost 7")
and about 2cm tall (almost 1")
so that is the approximate dimensions for small
for medium
probably around 10" wide (25.5cm)
about 1 1/4" tall (3cm)
could someone with 1IS, 2IS, 1SC, 1GS, 2GS, 3GS, 1LS, 2LS, 3LS and all the other models that want vinyls find out if the small can fit into the rear quarter panel window
also we will probably have to do external vinyls because most of us have tint on the rear so it will be hard to see the decals if they are placed on the inside of the window
#65
Hacked CL to become a Mod
ok I measured it and i think 17 cm is ok for the rear quarter panel window for the 1SC...we can also go 20-25cm for the rear window without it looking like a race decal
#66
yeah I measured the rear quarter panel for the 2IS, and it fits too
and yes external vinyls is a must for mine at least hehe. unless I put 'em in the front somewhere (hhmm)
and yes external vinyls is a must for mine at least hehe. unless I put 'em in the front somewhere (hhmm)
#67
Pole Position
iTrader: (3)
Join Date: Feb 2008
Location: KENT, WA
Posts: 2,726
Likes: 0
Received 0 Likes
on
0 Posts
I went ahead and pm'd everyone on my.IS about the decal. But some of those that I pm'd, are the ones that didnt reply about the meet Hopefully I get a better response, but not going ot hold my breath.
#68
Lexus Fanatic
Thread Starter
Join Date: Dec 2005
Location: Los Angeles/Vancouver
Posts: 6,231
Likes: 0
Received 0 Likes
on
0 Posts
now im worried about the small version of the long decal not fitting the 1IS
it does have small rear quarter window
so might have to resort to printing out the old versions (the more squarish and bulky ones) for the quarter rear windows in small quantities
IS3_FTW, do u think the long version will fit ur IS300?
it does have small rear quarter window
so might have to resort to printing out the old versions (the more squarish and bulky ones) for the quarter rear windows in small quantities
IS3_FTW, do u think the long version will fit ur IS300?
#70
Lexus Fanatic
Join Date: Aug 2006
Location: Vancouver, BC
Posts: 7,468
Likes: 0
Received 0 Likes
on
0 Posts
#71
Lexus Fanatic
Thread Starter
Join Date: Dec 2005
Location: Los Angeles/Vancouver
Posts: 6,231
Likes: 0
Received 0 Likes
on
0 Posts
#72
Lexus Fanatic
Thread Starter
Join Date: Dec 2005
Location: Los Angeles/Vancouver
Posts: 6,231
Likes: 0
Received 0 Likes
on
0 Posts
ok just in case we have to resort to using this more bulky version for some of the members out there for their smaller quarter windows
i have polished up this version a bit more
and of course, we will still do the long versions too
what do u guys think?
lets call this version A
and the long one, version B
i have polished up this version a bit more
and of course, we will still do the long versions too
what do u guys think?
lets call this version A
and the long one, version B
#75
Lexus Fanatic
Thread Starter
Join Date: Dec 2005
Location: Los Angeles/Vancouver
Posts: 6,231
Likes: 0
Received 0 Likes
on
0 Posts
just to make things clear
version A
version A will come in 1 size only, im thinking around 6" (~15.5cm) wide and about 1-3/4" (4.5cm) tall
version B
version B will come in 2 sizes
small
17cm wide (almost 7")
and about 2cm tall (almost 1")
medium
probably around 10" wide (25.5cm)
about 1 1/4" tall (3cm)
version A
version A will come in 1 size only, im thinking around 6" (~15.5cm) wide and about 1-3/4" (4.5cm) tall
version B
version B will come in 2 sizes
small
17cm wide (almost 7")
and about 2cm tall (almost 1")
medium
probably around 10" wide (25.5cm)
about 1 1/4" tall (3cm)
Last edited by UberNoob; 10-19-08 at 10:28 PM.