Motor swap, different ecu
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2018
Location: ID
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Motor swap, different ecu
I just finished a motor swap on my 01 is300, as I was plugging my ecu in I noticed the plugs were different. The motor is from an 03 is300. Is there any way I could still make this work? I would lake to use my original ecu, but also need to use the wire harness from the 03.
#2
Former Sponsor
01 and 02-05 are completely and absolutely different. They cannot be adapted to work on the other harness. Even if you swap engine harnesses you would still have to swap out every chasis harness and every computer.
you need to reinstall the 03 harness and ECU, that is your only option.
-Brandon Elzner-
www.quantum-auto.com
you need to reinstall the 03 harness and ECU, that is your only option.
-Brandon Elzner-
www.quantum-auto.com
The following users liked this post:
jdmek998 (04-25-23)
Thread
Thread Starter
Forum
Replies
Last Post