Tim151's build thread
#47
#48
Pit Crew
Thread Starter
#49
Pit Crew
Thread Starter
Got the front springs in Rsr half downs Makes such a difference measuring before car was 27 inches from ground to fender now it's 25 1/2 which that will raise up a tad once the rear springs go in.
#57
Pit Crew
Thread Starter
Took the Lexus to my local 1/8th Mile with my best friends Chevy ss to see what these mods have done.
most of the races I won due to my friend not getting traction but it was very very close at the end my best run was a 9.08 at 79mph I learned the car did better in drive in sport + mode then using the paddle shifters
I was the winner
Staged and ready to go
most of the races I won due to my friend not getting traction but it was very very close at the end my best run was a 9.08 at 79mph I learned the car did better in drive in sport + mode then using the paddle shifters
I was the winner
Staged and ready to go
#58
Intermediate
iTrader: (4)
Tim,
It was good meeting you at Charlotte Cars and Coffee this past weekend. Pics don't quite do your car justice. Very nicely put together. Sorry we didn't have a chance to catch back up after you checked out the Supra. Hopefully we'll have a chance to better connect some of the Charlotte Lexuses (Lexi ). Here's the link to my RCF build thread. Hoping to get Roman to take some pics soon now that I've gotten pretty much everything installed.
https://www.clublexus.com/forums/bui...ork-s-rcf.html
Westley
It was good meeting you at Charlotte Cars and Coffee this past weekend. Pics don't quite do your car justice. Very nicely put together. Sorry we didn't have a chance to catch back up after you checked out the Supra. Hopefully we'll have a chance to better connect some of the Charlotte Lexuses (Lexi ). Here's the link to my RCF build thread. Hoping to get Roman to take some pics soon now that I've gotten pretty much everything installed.
https://www.clublexus.com/forums/bui...ork-s-rcf.html
Westley
#60
Pit Crew
Thread Starter
Well it’s not finished but my good friend did this real carbon overlay on my engine cover turned out pretty good still need a couple more coats of clear though