Hi guys, I've been meaning to create a build thread for awhile now.

I just never got around to doing it lol - so here's me attempting to be less lazy.
I'll update and get more pics up as time permits.

Specs:
2014 Lexus IS350 F-Sport RWD
w/ Nav, ML, BSM, VSRS, AVS, Cargo Net, and Lexus Illuminated Door Sills

Perfomance Mods List:

1. JoeZ Intake Tube
2. F-Sport Drop In Air Filter
3. AFE Magnum Force Intake
4. PPE Engineering Headers
5. JoeZ Axleback Exhaust
6. RR-Racing Ultimate Steering Response System (USRS)
7. RSR Down Springs
8. 4.083 Differential Gear Swap
9. Vivid Racing (VR Tuned) Flash Module
10. Orange Virus e85 Tune @ 7400 RPM
11. RR-Racing Lightweight Racing Battery

Air Ride Setup:

1. Airrex Air Struts (Triple Bellows)
2. Airlift Performance 3H Air Management
3. Accuair 5 gallon White Powder-coated Tank
4. Dual Viair 444c Compressors
5. SMC Check Valves

Aesthetics Mods List:

1. Huber Optik Ceramic 40% (Sides and Rear)
2. Solar Adaptive Transition Film 75% (Front)
3. Aimgain Carbon Fiber Front Lip
4. All Fit Automotive Lip Kit (Front and Sides)
5. Seibon Carbon Fiber Sideskirts
6. Stillen Rear Diffuser
7. 20" Vossen CVT 20x9 +38(F) 20x10.5 +45(R) 225/35/20, 255/30/20
8. 20" Vossen VFS5 20x9 +38(F) 20x10.5 +45(R) 225/35/20, 255/30/20
9. Akata 5mm Spacers (F)
10. Rimlox Wheel Locks w/ Muteki Burnt Blue SR45R Lug Nuts
11. Reflective Blue Wrapped Brake Calipers
12. Blue Paddle Shifter Extensions
13. Carbon fiber wrapped interior trims (door panels, center accents, steering wheel bottom trim)
14. Blacked-Out Rear Emblems
15. Carbon Fiber Rear License Plate
16. DAR Rear Spoiler
17. Lexus Body-Side Moldings
18. Lexus RCF Rear Fender Molding
19. Carbon Fiber Wrapped Interior Console Pieces

I want to take a moment to thank Aroldo and Danny @ Deviate Autosport for helping me in this build practically every step of the way!

For anyone who's in Houston, TX. or any nearby areas, do not hesitate to take all of your automotive needs to Deviate Autosport.
Be it a simple tune up, diagnostics, exhaust work, wheel repair, paint/body, or even a full vehicle wrap, this guy does it all!

They specialize in vehicle wraps, be it a trim wrap, a roof wrap, a wheel wrap, or the whole vehicle, they will wrap anything and everything.
(This guy has a speaker on his desk that's wrapped in carbon fiber for Pete's sake...)
He even has customers who ship their Ferrari's across state to get their vehicle wrapped. O_O;

The owner (Aroldo) is so **** in his works, that even the Vossen center caps has to be in the same perfectly centered orientation as the stamped casting on the wheel. Check the pictures below!

They definitely do not shy away from any challenges and have been more than helpful getting my build to where it is today.

If anyone is ever in the area, definitely pay them a visit and tell them that Brian w/ the white Lexus sent ya'
http://www.deviateautosport.com/

Vossen CVT Day 1:






















Special Thanks to Aroldo @ Deviate Autosports (pictured below) for making this a dream come true!

 

Mod Items Below:

PPE Headers:








RR-Racing USRS Bushings:
Review Thread Below:
https://www.clublexus.com/forums/sus...gs-review.html

 

Past Setup (19" TSW Portiers):
19x8 235/35/19 | 19x9.5 265/30/19 Michelin Pilot Super Sports













Stock (Except for Ez-Lip) Taken on a garage rooftop:

 

Lovely build

We need night shots and night rolling shots to see those brakes !

 

very nice! not a fan of the door bumpers, but they do serve a purpose. any plans on an exhaust? if I may suggest, joe z cat back! will go nice w/ everything else you already have. keep it up!

 

Nice! Where you get rear spoiler and was it drilled or taped on? I

 

beautiful car, i cant wait till i get my Vossen, beautiful set up man

 

Thanks!
I'll get some night shots for ya soon . Not sure if I can promise you any rolling shots, but we'll see.

LoL, I forgot I added those edge guards. Yup they've surely saved me quite a few times already. In fact some person scraped their bumper turning into a parking spot, and the edge guard took the brunt of the damage, so I'm happy with them.

Not too sure I'll go JoeZ exhaust as I think it'll be too loud with headers. Have an F-Sport axle back exhaust planned for the future at the moment.

Thanks!
The dealer added the spoiler as part of the deal when I got the car, so I'm not entirely sure where they got it. I believe it's just taped on. At least I'm hoping so :X.

Thanks for the kind remarks, the Vossens in this particular setup sure are heavy though. I think it's like 30lbs front and 31lbs rear. I definitely felt a difference in performance and amount of braking power needed to stop the car now. But the looks can't be beat

 

Damn man! Them Vossens is looking hot

 

You are the man! by the way what brand tires are you using? Thanks

 

Hey there, hoping you get your rubbing situation sorted.

I have some cheap tires on right now called Accelera Phi, they were the only thing in stock locally in those sizes.

I researched and researched, but didn't find many options in 225/30/20(F) and 255/30/20(R).
The Hankook Ventus v12 Evo1 in those specs are discontinued.

The Michelin PSS, I know from experience on prior setup, that they run on the wider sides and hence didn't want to go with them again, plus they're hard to locate due to demand.

The Nitto tires which are known for stretching didn't have them in the specs for both.

So yeah it was pretty slim pickings

 

Thanks for the info. Keep up the good work. Enjoy.

 

Rare sight with those TSWs. Nice! I love those graphite CVTs too! Build's looking good.

 

Yo i just hit up your boyz at deviate on some work done. But hows your bags comming along?

 

When u added the header did it affect your performance?