Zelfiris' ISF
Thread Starter
Lead Lap
Joined: Jun 2013
Posts: 479
Likes: 1
From: Toronto
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
8 Tips for Improving Your Hybrid or Plug-in Hybrid's Efficiency!
Michael S. Palmer
10 Best Lexus Models No One Remembers
Joe Kucinski
TRD Off-Road Premium: Best 2026 4Runner, Except This One Thing
Michael S. Palmer
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
Top 10 Lexus/Toyotas With The LEAST 5-Year Depreciation
Joe Kucinski
Lexus LC500 Convertible Auction: A Preview of Rising Values?
Brett Foote
Thread Starter
Lead Lap
Joined: Jun 2013
Posts: 479
Likes: 1
From: Toronto
Also, just my opinion. Its a lot more cost effective to paint yourself. My body shop did a great job but I see chipping around the edges for the lettering and honestly, if I had done it myself, I just need to respray down the road.
https://www.clublexus.com/forums/aut...e-emblems.html
Driver School Candidate
Joined: Sep 2019
Posts: 30
Likes: 5
From: ON
Just resurrecting this relic thread since I believe Zelfiris has moved on, and I am the new owner. Shot them a P.M. to try to confirm, but last activity was 2 months before I even test drove it from a dealer.
The Vinyl is gone, and the rep spoiler was trashed during removal (along with some minor chips/dings to the trunk lid in that area. The gloss black name badges were also trashed, finally replaced them, but had to get generic 'chrome' ones, scratch em up, and plastidip. It turned out better than I was expecting. Finally figured out how to get hardware safely lodged into the ABS base plate of the replacement lip spoiler, but the weather cooled off too much to trust proper adhesion, fortunately a heat wave is en route. Unfortunately I am working pretty much all the way through, hopefully have enough time, but I doubt I'll revisit until next weekend.
Took apart the intake to clean the cone filter, MAF, intake pipe and throttle body today, and haven't been able to get thoughts of the VLand update tail lights out of my head. Would need to be smoked to align with the gloss black/carbon theme. Will get pictures sometime, haven't bothered with picture uploading in ages, so will have to familiarize myself all over again.
The Vinyl is gone, and the rep spoiler was trashed during removal (along with some minor chips/dings to the trunk lid in that area. The gloss black name badges were also trashed, finally replaced them, but had to get generic 'chrome' ones, scratch em up, and plastidip. It turned out better than I was expecting. Finally figured out how to get hardware safely lodged into the ABS base plate of the replacement lip spoiler, but the weather cooled off too much to trust proper adhesion, fortunately a heat wave is en route. Unfortunately I am working pretty much all the way through, hopefully have enough time, but I doubt I'll revisit until next weekend.
Took apart the intake to clean the cone filter, MAF, intake pipe and throttle body today, and haven't been able to get thoughts of the VLand update tail lights out of my head. Would need to be smoked to align with the gloss black/carbon theme. Will get pictures sometime, haven't bothered with picture uploading in ages, so will have to familiarize myself all over again.
Thread
Thread Starter
Forum
Replies
Last Post
ngl1145
IS F (2008-2014)
26
Apr 29, 2008 04:42 PM