Intro/2jzgte build help
Thread Starter
Driver School Candidate
Joined: Mar 2013
Posts: 12
Likes: 0
From: Ny
Intro/2jzgte build help
Hey guys just purchased this 99 sc300 after always looking for a 2jzgte to get my hands on 
. Also always loved the sc platforms. Don't know much about it yet been with Nissan most of my life( build wise) but always loved the supras. My first car was a p-type 85 supra that we swapped in a 6mge. Loved it. But I just bought this and would like to get some help on usdm or jdm (kid told me usdm) I've read up a lot on them but still don't know. Has a mass air flow delete so that is one reason why I can't tell haven't pulled the vc off too inspect cams or looked at the injectors. It's on a fuel pressure tune with single t-70 journal bearing turbo that dyno'd at 500whp and 430ftlbs on 20lbs. I'd like to know what the best standalone or tuning source would be for this. I want to reach 650 at least I've read the stock blocks can reach that safely ( correct me if I'm wrong) [
. Also always loved the sc platforms. Don't know much about it yet been with Nissan most of my life( build wise) but always loved the supras. My first car was a p-type 85 supra that we swapped in a 6mge. Loved it. But I just bought this and would like to get some help on usdm or jdm (kid told me usdm) I've read up a lot on them but still don't know. Has a mass air flow delete so that is one reason why I can't tell haven't pulled the vc off too inspect cams or looked at the injectors. It's on a fuel pressure tune with single t-70 journal bearing turbo that dyno'd at 500whp and 430ftlbs on 20lbs. I'd like to know what the best standalone or tuning source would be for this. I want to reach 650 at least I've read the stock blocks can reach that safely ( correct me if I'm wrong) [
OP .. nice find . am sure you will find tons of info on this site ... welcome to the world of 2jz.
Thread Starter
Driver School Candidate
Joined: Mar 2013
Posts: 12
Likes: 0
From: Ny
Thanks guys ! Ill work on the car and post more pics and updates when its out, need to see what I'm working with first. I discovered it is a 93 motor which emissions will tell me to pound salt lol. Does any standalone mimic or simulate obd2? If not looks like she may be running around at night haha( upstate ny still suck)
Trending Topics
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
Top 10 Lexus/Toyotas With The LEAST 5-Year Depreciation
Joe Kucinski
Lexus LC500 Convertible Auction: A Preview of Rising Values?
Brett Foote
GX 550 vs TX 550: Best 3-Row Luxury Lexus Family Hauler
Michael S. Palmer
9 Best Lexus Models You Can Buy for Half Price (And 1 You Shouldn't!)
Joe Kucinski
2026 Lexus NX Buyer's Guide: Models, Features, Prices & More!
Brett Foote
Top 10 Reasons to Buy a Lexus TX 550h+ (& 3 Reasons to AVOID!)
Michael S. Palmer
Top 10 Lexus & Toyota Models of the 1990s RANKED!
Joe Kucinski
10 Great Toyotas That Could Have Been Lexus Models
Joe Kucinski
Thread Starter
Driver School Candidate
Joined: Mar 2013
Posts: 12
Likes: 0
From: Ny
Came from Connecticut. It very well could have been there before I'm unsure of its history. I know the kid and his buddy swapped in the gte motor...it is usdm and its a 93 motor which doesn't help me with emissions one but lol guess it will be a night rider
Thread Starter
Driver School Candidate
Joined: Mar 2013
Posts: 12
Likes: 0
From: Ny
Yea it does. Actually having some trouble with it. It runs n drives fine then if you give it full throttle it will lose power and have no throttle. Afr drops to like 8-9 and it dies. Wait a minute and it starts back up. Any ideas?
Thread
Thread Starter
Forum
Replies
Last Post
TurboLexra
SC - 1st Gen (1992-2000)
19
Aug 22, 2011 08:17 AM
