1SickGS300 Build Thread
Thread Starter
Driver
Joined: Feb 2012
Posts: 133
Likes: 0
From: Charleston, SC
1SickGS300 Build Thread
So i decided to post up a build thread!! I bought the car from a member here, back in February. I drove and met him in Virginia . Cool guy! Here is the car the way i bought it. It hasn't changed much but many plans coming soon! 
First thing i wanted to do was air bag it which i did. I even made a DIY! https://www.clublexus.com/forums/sus...stall-diy.html
The next steps is to buy some boss *** rollers,exterior kit, fresh paint,suspension components,aristo swap,and etc, so stand by!!
here is some pics of it bagged enjoy!!
First thing i wanted to do was air bag it which i did. I even made a DIY! https://www.clublexus.com/forums/sus...stall-diy.html
The next steps is to buy some boss *** rollers,exterior kit, fresh paint,suspension components,aristo swap,and etc, so stand by!!
here is some pics of it bagged enjoy!!
Last edited by 1SickGS300; Dec 12, 2012 at 12:49 PM.
Trending Topics
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Lexus NX 350h: A Fuel-Sipping Secret Hot Hatch???
Michael S. Palmer
5 Best & 5 Worst Lexus Daily Drivers
Joe Kucinski
Top 5 Hottest Lexus & Toyotas in 2026 (Hardest To Buy)
Brett Foote
2026 Lexus IS 350 F Sport Review: The Last of Its Kind Still Rocks
Michael S. Palmer
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
i know some people cut a hole in the engine bay to avoid your uca from hitting. i know mine was hitting when i was dumped. i just turned the radio up. i then switched to coilovers and soon hopping back to bags soon. but i'd definitely beef up the suspension. looks good btw.. it's ... on point! lol
Thread Starter
Driver
Joined: Feb 2012
Posts: 133
Likes: 0
From: Charleston, SC
got to love air!Thank you! I am planning on getting wheels and a few items for the car around tax season and hopefully a swap around summer time. Im doing a lot of reading and trying to figure out what offset, disk size, and camber that i might need. There is a lot to it. I want 19's or 18's but I think 18 will look to small? I cant decide yet lol!. i want at least a 3 inch lip on the fronts and a 4 to 5 inch on rears. I would like to not have to pull if at all possible. Plus i want to be able to ride low and still be able to turn with out damage.lol I also need to find better suspension components to help with ride low? do you have any ideas?